Advertisement
500A POWER PACK (MP7433)
USER GUIDE
Please read this operating manual fully and abide by all safety
instructions when using this device.
Keep these instructions for future reference. When passing the
device on to others be sure to also include all documentation. The
instruction leaflet is also available on our website:
www.maypoleltd.com
Advertisement
Table of Contents
Related Manuals for MayPole MP7433
Summary of Contents for MayPole MP7433
- Page 1 500A POWER PACK (MP7433) USER GUIDE Please read this operating manual fully and abide by all safety instructions when using this device. Keep these instructions for future reference. When passing the device on to others be sure to also include all documentation. The instruction leaflet is also available on our website: www.maypoleltd.com...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS • Explosive gases may escape from the battery during the use of this product. This is normal, but please follow the below guidelines: • Do not use near flames or sparks – do not smoke in the area. •... - Page 3 COMPONENTS Box contains: 500A power pack Smart cable jump lead USB multi output cable Laptop connectors (x8) with link cable AC Mains charger 12V cigar lighter charger Impact resistant carry case...
- Page 4 PRODUCT LAYOUT DIGITAL DISPLAY 15V 1A INPUT 3 MODE LED FLASHLIGHT 19V 3.5A 12V 10A OUTPUT 12V JUMPSTART OUTPUT 2 X 2.4A USB PORT ON/OFF OUTPUTS FLASHLIGHT BUTTON MODE BUTTON CHARGING • The power pack is partially charged from the manufacturer. Fully charge the unit before first use.
- Page 5 JUMP STARTING VEHICLES ALWAYS CONSULT YOUR VEHICLE MANUFACTURERS HANDBOOK TO CONFIRM CORRECT JUMP-STARTING OPERATION Note: The battery within the device must be at a minimum of 20% for the jump start function to operate. Ensure all non-essential loads (fan, lights, radio etc.) are switched off prior to commencing the jump starting procedure.
-
Page 6: Boost Function
SMART JUMP START CABLES The smart jump start cables include built in safety features to protect against: • Low voltage • Reverse polarity • Short circuit • Over temperature • Overload RED LED BOOST BUTTON GREEN BOOST FUNCTION If with the correct connection between the jumpstart cables and the vehicle battery the red LED light is illuminated and the green LED light is off this indicates a very low voltage in the vehicle’s battery and requires the boost function. - Page 7 LED AND WARNING TONES GREEN WARNING TONE CONDITION Once Smart cables are connected to the 12V jumpstart port Smart cables are connected to the vehicle battery. Ready to start No Sound the engine Slow flash No Sound Power pack battery capacity is too low. Re-charge the device Slow Engine has not been cranked within 30 seconds.
-
Page 8: Technical Specifications
Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. Declaration This apparatus meets the requirements of: LVD IEC 60950-1:2005 (2 Edition)+A1:20091; EN 60950 1:2006/A11:2009/A1:2010/A12:2011:A2:2013 EMC EN61000-6-1:2007; EN61000-6-3:2007+A1:2011 RoHS Directive (EU) 2015/863 amending 2011/65/EU Technical Manager, Maypole Ltd, June 2021 Email: sales@maypoleltd.co.uk Web: www.maypoleltd.com...
Need help?
Do you have a question about the MP7433 and is the answer not in the manual?
Questions and answers