Aiphone LA-B Installation Manual

831222 0489 ©
® Al PHONE
HOME INTERCOM SUB STATION '
MODELS:
INSTALLATION MANUAL
H-155 mm (6-1
IS")
-^
165 mm
(6-1/2")
j
130 mm
(5-1/8")
1-call, semi-flush mount
-do-, privacy type
ACCESSORIES INCLUDED
WOOD SCREW (x2)
(4.1 x 22 ±)
- BLACK
E BLUE
1 BROWN
LA-BN
15 mm 65 mm
(9/16") (2-9/16")
-115 mm (4-1/2")-J
LAB
MOUNTING
BACK BOX
(Model: BBX-3)
*Must be ordered separately.
SCREW (x2)
(4 x 25 ±)
NAMES AND FUNCTIONS
Ilf |i j | tint!
litis t !.t i mi
fti jiff iiiif ii
® Speaker
(2) Panel
(D CALL button
® PRIVACY button
(5) 3-pin connector (for station wiring)
(6) Mounting back box (Model: BBX-3)
DESCRIPTION AND PRECA UTIONS
fflilliilil
111-11II ;if S'i I
i
hits!!1i111
1. LA-B and LA-BN are 1-call sub stations, semi-flush mountable and used for your LAF-B Home Intercom System: LAF-
10B (Type A), LAF-7B, LAF-3B, LAF-1B and existing LAF stations. When used for LAM-1/3 system, E and — connec¬
tors must be united.
2. Installation; Do not connect LA-B/BN sub to more than 2 master stations.
3. Operation; Simply depress CALL button to signal a master (and PRIVACY button pops up on LA-BN). After master
replies, talk handsfree. DO NOT PRESS CALL BUTTON DURING COMMUNICATION.
After communication, depress PRIVACY button again on LA-BN.
Incoming call from master is announced by electronic tone or voice.
Just reply handsfree (on LA-BN, after momentarily depressing CALL button).
4. Before you install and operate the equipment, read and observe carefully Instructions stated in the Installation/Operation
Manuals packed with each LAF-B master unit.
INSTALLATION
3. PUSH TO REMOVE
(1) Semi-flush mounting to wall (in new construction);
1. For new construction, use a mounting back box
(Model: BBX-3).
2. Install the back box in the wall.
f
3
. push t<
3. Remove a panel on front case. /
4. Mount LA-B/BN unit to the back box /
/LY^
^
with two screws (supplied). /
rs "
5. Reattach the panel. /
/ /^Z\
put under rib
TO REATTACH
; V -V
MOUNTING
BACK BOX
(BBX-3)