Download Print this page

WilTec 64642 Assembly Instructions Manual

Pop-up gazebo 250x250 cm

Advertisement

Quick Links

64642–64644 – Pop-up Gazebo 250 x 250 cm
Scope of delivery
A – Frame – 1×
C – Bag – 1×
E – Tent pegs – 4×
G – Hex wrench (only for maintenance) – 1×
Assembly
Stand opposite each other with a second person. Grasp one cross strut of the frame (A) from above
and the other cross strut from below (see fig.). Lift the frame slightly, move backwards, and press the
TIPS: Raise the frame by 5–8 cm, especially in the case of high grass or sand. Do not touch the cross
struts at the connection points to avoid crushing. Open the frame to 80–90 %.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.de
ASSEMBLY INSTRUCTIONS
Step 1 – OPENING THE FRAME
rods together.
Item 64642–64644
B – Canopy – 1×
D – Weight bag – 8×
F – Rope – 1×
Page 1
11 2024-1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 64642 and is the answer not in the manual?

Questions and answers

Summary of Contents for WilTec 64642

  • Page 1 ASSEMBLY INSTRUCTIONS 64642–64644 – Pop-up Gazebo 250 x 250 cm Scope of delivery A – Frame – 1× B – Canopy – 1× C – Bag – 1× D – Weight bag – 8× E – Tent pegs – 4×...
  • Page 2: Step 2 - Attaching The Canopy

    TIPS: Lift the frame slightly while pushing the roof connector upwards. Press the connection point upwards with both hands. © by WilTec Wildanger Technik GmbH Item 64642–64644 Page 2 http://www.wiltec.de...
  • Page 3: Step 4 - Adjust The Height

    TIPS: Do not stand on the gazebo base when pulling out the leg. The tension resulting can otherwise lead to damage. Do not adjust the height of the legs until the frame has locked into place. © by WilTec Wildanger Technik GmbH Item 64642–64644 Page 3 http://www.wiltec.de...
  • Page 4 Pull all pegs out of the ground. Press the locking buttons on the legs to push them together. Step 2 – UNLOCKING THE LOCKED CONNECTION POINT Pull the centre roof joint downwards until the frame begins to collapse. © by WilTec Wildanger Technik GmbH Item 64642–64644 Page 4 http://www.wiltec.de...
  • Page 5 ASSEMBLY INSTRUCTIONS Step 3 – FOLDING THE FRAME Raise the gazebo 5–8 cm and push it together from both sides until the frame is completely folded. © by WilTec Wildanger Technik GmbH Item 64642–64644 Page 5 http://www.wiltec.de 11 2024-1...
  • Page 6 Loosen the belts and insert the red plugs into the openings on the rollers. Pull the belts tight by pulling the belt loop downwards. © by WilTec Wildanger Technik GmbH Item 64642–64644 Page 6 http://www.wiltec.de...
  • Page 7 Crossbars H(L) Gazebo legs with roller (left side) Important note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 64642–64644 Page 7 http://www.wiltec.de...

This manual is also suitable for:

6464464643