Page 1
1.Use a USB C cable connect a PD source and the USBC port; 2.Put the iPhone on the Qi2 charging area, put the AirPods on the TWS charging area; Manufacturer: SHENZHEN DNS INDUSTRIES CO., LTD. Address: 23/F Building A, Shenzhen International Innovation Center, No.1006 Shennan Road, Futian, Shenzhen, China...
Page 2
Specification: Input: 5V DC/3A, 9V DC/3A Output1: 5W/7.5W/15W(for iPhone) Output2: 5W(for AirPods) Dimension: 70mm*70mm*78.8mm. Compatible with iPhone 15 Pro Max iPhone 15 Pro iPhone 15 Plus iPhone 15 iPhone 14 Pro Max iPhone 14 Pro ...
Page 3
FCC Warning & Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 4
Declaration for EU Compliance Hereby, SHENZHEN DNS INDUSTRIES CO., LTD. declares that the Radio equipment is in compliance with Directive 2014/53/EU requirements, the full text of the declaration of conformity are available at the following internet address: https://www.dnschina.com Working Frequency Wireless charger for output 1: 360KHz-365KHz at 15W output, 110KHz-205KHz below 15W output;...
Need help?
Do you have a question about the WD-290B and is the answer not in the manual?
Questions and answers