What is in the box 1) Qi Wireless Charger x1pc 2) Wall charger x1pc 3) Quick User Manual x1pc Manufacturer: SHENZHEN DNS INDUSTRIES CO., LTD. Address:23/F Building A, Shenzhen International Innovation Center, No.1006 Shennan Road, Futian, Shenzhen, China...
Qi standard; Charging type: one-on-one charge corresponding area; Fast charging model only work with QC quick charger. Specification: Main functions: single coil wireless charger transmitter; Standard version: WPC - 1.2.4; Products applicable: all wireless charging equipment accorded with QI standard; Charging type: one-on-one charge corresponding area;...
Page 5
port) of the USB cord into the wall charger, and then plug the charger into the wall, or you can plug the larger end into a PC 2, Place Your Cellphone on the Qi Charger After you have connected the charger to a power source (either your computer or a wall outlet), all you need to do to charge your phone is simply place your phone on top of the charger.
3, Charging Status Indicator 1) The indicator green light is on for 4s , then enters the standby status, the green light goes out. 2) Please lay the device directly on wireless charger for charging, the green light always stays on when the charger is in charging status 3) When the device is full of power, the green light goes out.
Page 7
install your heart-birth-maker, the electromagnetic wave have influence on heart-birth-maker’s work. B .Attention! It may led to heat,fire and electric shock: 1 Do not put it into water or any other liquid,Do not make it wet; 2 Do not pull the AC adapter out with wet hands, ensure the safety and integrity of the adapter;...
Page 8
11 Do not make any breakage on the AC adapter, please make sure you connect the AC adapter fully and take the AC adapter off the plug when it’s not used ; 12 Do not use travel converter; 13 Please teach your children to use This equipment has been tested and found to comply with the limits for a WPC device, pursuant to Part 18 of the FCC Rules.
Page 9
encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Need help?
Do you have a question about the AC75L4C and is the answer not in the manual?
Questions and answers