Advertisement
Quick Links
EURVC-SB CONVENTIONAL WALL SOUNDER / CONVENTIONAL WALL SOUNDER VAD
OVERVIEW
This device is an assembly of an 100-2051V Sagittarius system interface module and a 100-3801VW conventional sounder / 100-3800VW
conventional sounder + visual alarm device. Sounder's output is activated following an alarm condition of the Sagittarius system.
INSTALLATION - IMPORTANT NOTES
- The device must be installed following your national and/or international codes of practice and standards: check them before performing the
installation of this device.
- Test this device after installation.
1) Detach the front operating section from the sounder back box (→ SOUNDER OPENING PROCEDURE).
2) Extract the 100-2051V from the sounder's back box (→ MODULE'S EXTRACTION).
3) Set the 100-2051V's link switch to ON.
4) Extract the 100-2051V's battery covers.
5) Insert both batteries into their 100-2051V holders, oriented as per polarity marks.
6) Link the 100-2051V device to the Sagittarius system (→ LINKING).
7) Reinstall the battery covers.
8) Check the wireless link quality of the 100-2051V positioned in the final installation location (→ WIRELESS LINK QUALITY CHECK).
9) Install the sealing pad if the sounder is to be installed outdoors and/or in damp environments (not EN 54-3 approved)
(→ OUTDOORS AND DAMP ENVIRONMENTS INSTALLATION).
10) Fix the sounder back box to the wall on the final installation location (→ WALL INSTALLATION).
11) Reinstall the 100-2051V into the sounder's back box (→ MODULE'S INSTALLATION).
12) Set sounder's tone and volume (→ OUTPUT TONE SETTING , →OUTPUT VOLUME SETTING).
13) Reinstall the front operating section onto the sounder back box (→ SOUNDER CLOSING PROCEDURE).
14) Test the 100-2051V + 100-3801VW / 100-3800VW to check if it works properly (→ TESTING).
Eurotech Fire Systems Ltd - 19/20 Stratfield Park - Elettra Avenue - Waterlooville
Hampshire - PO7 7XN - United Kingdom
100-2051V + 100-3801VW
100-2051V + 100-3800VW
EURV-MODW WIRELESS WALL SOUNDER MODULE +
WHITE BODY
INSTALLATION
www.argussecurity.it
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Eurotech EURV-MODW
Summary of Contents for Eurotech EURV-MODW
- Page 1 13) Reinstall the front operating section onto the sounder back box (→ SOUNDER CLOSING PROCEDURE). 14) Test the 100-2051V + 100-3801VW / 100-3800VW to check if it works properly (→ TESTING). Eurotech Fire Systems Ltd - 19/20 Stratfield Park - Elettra Avenue - Waterlooville www.argussecurity.it...
- Page 2 SOUNDER OPENING PROCEDURE When assembling or removing the front operating In order to detach the upper sounder body from the base: section of the sounder to/from the back box be careful to ensure the interconnection block is not 1) Insert the pins of the compatible key into the holes of one of the two side twisted which may cause damage.
- Page 3 Table 2 3) Move the link switch to position BLANK again; device will NOT WORK if the link switch is on position ON ! Eurotech Fire Systems Ltd - 19/20 Stratfield Park - Elettra Avenue - Waterlooville www.argussecurity.it Hampshire - PO7 7XN - United Kingdom...
- Page 4 OUTDOORS AND DAMP ENVIRONMENTS INSTALLATION Suitable, but not EN 54-3 approved for outdoor use. When installing the sounder outdoors or in a damp environment, carefully apply the self- adhesive sealing pad to the back of the sounder base (picture 5). WALL INSTALLATION Fix the sounder base to the wall;...
- Page 5 DIP configuration - switch 6 and 7 dB(A) evaluation Notes HIGH 100 dB(A) +/- 3 All tones MEDIUM HIGH MEDIUM LOW Table 3 Eurotech Fire Systems Ltd - 19/20 Stratfield Park - Elettra Avenue - Waterlooville www.argussecurity.it Hampshire - PO7 7XN - United Kingdom...
- Page 6 TONE SET DIP switch Tone Tone designation Tone description configuration: number 1,2,3,4 e 5 Warble Tone 800Hz for 500ms, then 1000Hz for 500ms 11101 Continuous tone 970Hz continuous tone 01011 Slow Whoop (Dutch) 500-1200Hz for 3500ms, then off for 500ms 10101 German DIN tone 1200-500Hz swept every 1000ms (1Hz)
- Page 7 Perform such opera- tions without using excessive force. Picture 12 Picture 11 Eurotech Fire Systems Ltd - 19/20 Stratfield Park - Elettra Avenue - Waterlooville www.argussecurity.it Hampshire - PO7 7XN - United Kingdom...
- Page 8 TAMPERING DETECTION AND NOTIFICATION Tampering attempts are detected by a pair of switches (one on the front, the other on the back of the module); once detected, a tampering event message is broadcasted to the system. TESTING 1) Activate the fire security system’s alarm condition. 2) Check the 100-2051V + 100-3801VW / 100-2051V + 100-3800VW output activation.
- Page 9 Picture 13 Eurotech Fire Systems Ltd - 19/20 Stratfield Park - Elettra Avenue - Waterlooville www.argussecurity.it Hampshire - PO7 7XN - United Kingdom...
- Page 10 TECHNICAL SPECIFICATIONS (100-2051V) Communication range with the translator / 200 m (in open space) expander Operating frequency 868 MHz Operating frequency channels Battery voltage range Batteries type 2 X CR123A (3V) Radiated power 14 dBm (25 mW) >3 years (with parent expand- er’s check-up period default Batteries lifespan setting);...
- Page 11 Durability: Pass Temperature resistance: Pass Humidity resistance: Pass Shock and vibration resistance: Pass Corrosion resistance: Pass Electrical stability: Pass Eurotech Fire Systems Ltd - 19/20 Stratfield Park - Elettra Avenue - Waterlooville www.argussecurity.it Hampshire - PO7 7XN - United Kingdom...
Need help?
Do you have a question about the EURV-MODW and is the answer not in the manual?
Questions and answers