JVC TK-S241 Instructions

$C96777H-001
TK-S241
VIDEO CAMERA
Instructions
Thank you for purchasing the JVC TK-S241 video camera.
To obtain the best results from your new camera, read this
instructions carefully before use; retain the manual for future
reference.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
Due to design modification, data given in this instruction
book are subject to possible change without prior notice.
For USA and CANADA
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symboi, within an
equi-lateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
INFORMATION (FOR CANADA)
RENSEIGNEMENT (POUR CANADA)
This Class [B] digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numeénque de la class [B] respecte toutes les exigences
du Règlement sur le matérie! brouilleur du Canada.
information for USA
This device complies with Part 15 of the FCC Rules.
Changes or modifications not approved by JVC could void
For Customer Use:
Enter below the Serial No. which is located on the top of
the body.
Retain this information for future reference.
Model No. TK-S241
Serial No.
EFS
FEATURES
e High sensitivity; low residual image; low image distortion,
resists electric and magnetic fields and vibration. The cam-
era can be used in various fields.
e Since the camera uses AC 24V~_/DC12V ==, it can be in-
stalled and built into system easily.
e Internal, external, and line lock synchronization (Utype
is 60Hz,E type is 50Hz regions only) can be selected by switch.
èe The automatic electronic shutter adjusts its speed automati-
cally to provide correct exposure even if a manual iris lens is
used.
e The built-in backlight compensation function improves the
image quality for backlit subjects.
e The back focus adjustment function allows easy adjustment
and installation.
e C-mount or CS-mount lens can be attached to the camera
with the lens mount change function.
PRECAUTIONS
e Since this camera contains an AGC circuit, the sensitivity
increases automatically in dark places, and the image looks
grainy, but this is not a fault.
e If a zoom lens is used, mount it on the camera and check
the back focus before mounting the camera. This also
applies to lens ALC and level. (For more details, see the
instructions for the lens.)
e If a high-intensity object (such as a lamp) is shot, the image
on the screen may have vertical lines (smear) or blur
(blooming) at its periphery (especially in AES mode). This is
a characteristic of the CCD, and is not a defect.
e If an EE lens is used, set the automatic electronic shutter
switch (AES) to OFF. If set to ON, flickering may occur. Ifa
manual iris lens is used, set the AES to ON.
e Where there are strong electromagnetic waves or magne-
tism, for example near a radio or TV transmitter, transformer,
motor, etc., the picture may contain noise.