Download Print this page

Scott Aerator DA-20 Assembly Instructions

Shallow water fountain

Download this manual

We at Scott Aerator thank you for your purchase.

goal to ensure that you are completely satisfied with your

new Fountain and that it continues to operate smoothly for

many years to come. Please take a few moments to read

through this document for proper assembly, installation and

maintenance to maximize the operating life of the unit.

Shallow Water Fountain

Assembly for Fountains and DA-20

This Kit Includes

It is our

1 - Float Platform

1 - Motor/Pump Assembly

1 - Fountain Nozzle (Fountain Models Only)

2 - Stainless Steel Filters or Debris Shields

2 - 5/16"X2" Stainless Steel Bolts

2 - Stainless Steel Nuts

4 - Stainless Steel Washers

6 - Stainless Steel Screws

Tools Needed

1 - 5/16" Wrench or Socket Driver

2 - 1/2" Wrenches (or Pliers)

Need help?

Do you have a question about the DA-20 and is the answer not in the manual?

Page 1 Shallow Water Fountain Assembly for Fountains and DA-20 This Kit Includes We at Scott Aerator thank you for your purchase. It is our 1 - Float Platform goal to ensure that you are completely satisfied with your 1 - Motor/Pump Assembly...
Page 2 6. Once your fountain is in the water, attach the fountain head by screwing it into place. Note DA-20 model does not have a fountain head. 7. Float the fountain to the desired position and secure the attached nylon ropes to four 8"x8"x16" cinder blocks submerged at least 12 feet apart.
Page 3 After cleaning, a visual inspection of the entire fountain is recommended to be certain nothing is restricting water flow. The Scott Aerator Company has engineered all of its water features to eliminate the need for time consuming and costly winterizing products and procedures.
Page 4 All other product components are warranted for one year from date of purchase. Scott Aerator will repair or replace failed parts under warranty when the defective unit is returned to the factory, shipping prepaid, and factory inspection establishes that the part was defective. The unit must be returned to the factory prior to shipment of replacement parts.