Related Manuals for Tre Modular Switch Divider
Summary of Contents for Tre Modular Switch Divider
- Page 1 Tre Modular - Switch Divider DIY Assembly Guide v3.1 Thank you for choosing Tre Modular. In this guide, we will walk you through the process of assembling your very own Tre Modular - Switch Divider module.
-
Page 2: Before You Begin
Always adhere to proper soldering techniques, work in a well-ventilated space, and handle electronic components with care to ensure the longevity and optimal performance of your Switch Divider. Ensure you have all the necessary components listed in the Bill of Materials. - Page 3 Legend: Front:...
- Page 4 Back:...
-
Page 5: Assembly Guide
Assembly Guide: Step 1: Identify and Sort Components Organize the components into groups based on their types: resistors, capacitors, diodes, potentiometers, connectors, switches and jack sockets. Step 2: Diodes (Front) Insert and solder diode according to the legend. 1N4002 Ensure correct orientation, referring to the diode's polarity. Insert and solder diodes according to the legend. - Page 6 Step 5: 1uf Capacitors Solder 1uf film capacitors onto the designated positions on the PCB according to legend. Step 6: Diodes (Back) Insert and solder 1N4002 diodes according to the legend. Ensure correct orientation, referring to the diode's polarity. Step 7: Capacitors (Back) Solder capacitors onto the designated positions on the PCB according to legend.
-
Page 7: Additional Information
If the module is working as it should. Insert the module into an available slot in your rack and secure it in place. Enjoy! Additional Information: For any additional questions or support, please contact Tre Modular at support@tremodular.com Happy patching!
Need help?
Do you have a question about the Switch Divider and is the answer not in the manual?
Questions and answers