Advertisement
Quick Links
Movable EV charger
40KW750V/1000V AC-DC
Product Specification
Product model：
MC40750HG(GB/T)
MC40750HE(CCS2) MC40750HA(CCS1) MC40750HJ(CHAdeMO)
MC401KHG(GB/T)
MC401KHE(CCS2) MC401KHA(CCS1) MC401KHJ(CHAdeMO)
Version：V1.1
Date：2023-01-12
Guangzhou Max Power New Energy Technology Co., LTD
25 Guangxing Road, Nansha District, Guangzhou City, Guangdong Province, China
www.mxpnet.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for MAX power MC40750
Summary of Contents for MAX power MC40750
- Page 1 Movable EV charger 40KW750V/1000V AC-DC Product Specification Product model： MC40750HG(GB/T) MC40750HE(CCS2) MC40750HA(CCS1) MC40750HJ(CHAdeMO) MC401KHG(GB/T) MC401KHE(CCS2) MC401KHA(CCS1) MC401KHJ(CHAdeMO) Version：V1.1 Date：2023-01-12 Guangzhou Max Power New Energy Technology Co., LTD 25 Guangxing Road, Nansha District, Guangzhou City, Guangdong Province, China www.mxpnet.com...
- Page 2 Catalogue 1.Overview................................2 2.Safety instructions..............................3 3.Appearance and Composition..........................4 4.Detailed technical parameters...........................4 5.Package diagram..............................5 6.Instructions for..............................6 7.Precautions for Use............................8 8.The appendix..............................9...
- Page 3 1.Overview 1.1 Introduction Dear customer, thank you for using the DC charger produced by our company . We sincerely hope that this product can meet your requirements, and look forward to your more valuable comments on the performance and function of the product. We will continue to improve and improve the quality of the product.
- Page 4 pull or twist the charging cable. The cable of the charging interface must be smoothed and not twisted to force the charging interface holder during use. -Do not shake the charging interface from side to side when inserting or removing the charging interface.
- Page 5 4.Detailed technical parameters Item MC40750 MC401K Voltage range 260-475Vac 380Vac(rated) Working frequency 45-65HZ Input The power factor ≥0.99 Input current 0-64A Input cable length Power 40KW GB/T:12V/24V CCS1 CCS2 CHAdeMO:12V Auxiliary power supply Voltage range 200-750Vdc 200-1000Vdc Output Maximum current...
- Page 6 6.Instructions for 6.1 Connect cables before power-on Specificat -- The input cable can adopt neutral line and ground line less than the live Content Reference picture line. -- Strictly follow the above label to connect the corresponding circuit breaker L1(Live wire1) position, do not connect wrong cables, otherwise the machine will burn;...
- Page 7 Step 5:connecting Step 6: Enter the start up interface Step 7: Charging interface Step 8: Draw interface, charge completed 6.3 Fault display interface 6.4 Routine maintenance table Check content Check the method Maintenance cycle 1. Observe whether the components, circuit and device structure of the charger are damaged or deformed;...
- Page 8 environment) 1. Check whether the power cable and control cable are damaged, Six months after the first especially whether the skin in contact with the metal surface is cut; commissioning, and then Power circuit connection 2. Check whether the insulation bandage of the power cable wiring once every six months to a terminal is off.
- Page 9 ●Transportation damage ●Incorrect installation, modification, or use ●Outdoor charging in rainy days leads to water inflow damage of charging pile. ●Extremely harsh operating conditions beyond those specified in this manual ●Machine failure or damage not caused by installation, repair, alteration or disassembly by our service personnel ●Failure or damage of the machine caused by non-standard use or not confirmed by the company ●Any beyond the scope of use specified in the relevant national standards...
Need help?
Do you have a question about the MC40750 and is the answer not in the manual?
Questions and answers