Page 1
CORTESE ® STO N E WA L L H UNG BAS I N INSTA LL AT I O N A ND CARE G UI D E Please retain for future reference...
Page 3
INTRODUCTION Thank you for purchasing this Cortese® Stone Wall Hung Basin. Please read this guide carefully before installing, using and cleaning this product, and retain it for future reference. If you have any queries in relation to this product or guide, please contact our Customer Service team on 020 3370 4057.
Page 4
INSTALLATION STEPS Before installation, please note that this basin is designed for wall mounting only, and we recommend that it is installed by a fully qualified plumber. 1 Mark out the installation height and the centre line of the basin on the designated wall at the recommended height as shown (for AS1428.1 compliance, this must be a distance of between 800-830mm from the floor to the top surface of the front of the basin).
Page 6
INSTALLATION STEPS (CONTINUED) 5 Using an 8mm spanner, screw a fixing bolt into each of the wall plugs and ensure that each bolt is securely in position before moving onto the next step. 6 Return the basin to its position against the wall, threading the fixing bolts through the holes in the rear of the basin.
Page 8
Do not use acidic or abrasive cleansers. Do not clean with a concentrated bleach or shampoo. Do not use scouring pads or other abrasive cleaning tools. Go to Lusso.com to activate your guarantee. Customer Care: 020 3370 4057 International: +44 20 3370 4057...
Need help?
Do you have a question about the Cortese Art 500 and is the answer not in the manual?
Questions and answers