Thank you for purchasing the Cordless Decompression Massage Belt. Please take a moment to
read this guide and store it for future reference.
INTRODUCTION
The Cordless Decompression Massage Belt helps alleviate pain and stiffness with a
combination of massage, heat, infrared light and magnets, plus inflatable support to
decompress the vertebrae in the lumbar area.
FEATURES
• Inflatable lumbar decompression
• 2 built-in massage motors
• 7 massage options
• 3 heat settings (104°F / 122°F / 140°F)
• Highly conductive graphene material heats up quickly and stays warm
• Theralite technology combines 4 infrared lights for additional relaxation (NOTE: infrared
light is not visible to the human eye)
• Magnetic therapy further complements muscle healing
• Rechargeable battery lasts up to 6 hours
CHARGING THE DEVICE
1. Charge the device fully before use.
2. Use only the power adapter/charger supplied with this device.
3. The adapter will display a RED light while charging. The adapter will display a GREEN light
when fully charged. NOTE: A full charge will provide about 5 hours of usage.
OPERATION
1. Secure the belt around your waist with the hook-and-loop strap. Attach the included
extender belt if needed.
2. Use the included hand pump to inflate the lumbar section. As the lumbar support inflates,
it relieves pressure on the discs in the lower back by extending the spine. To decrease the
pressure, press the air release button located on the bulb.
CORDLESS DECOMPRESSION MASSAGE BELT
Item No. 210200
User Guide
- 1 -
Need help?
Do you have a question about the 210200 and is the answer not in the manual?
Questions and answers