Page 1
Washing Machine User Manual CM 10140 BM 2820530198/ EN/ / 26/04/2022 12:18...
Page 2
Symbols on the Display....22 Table of Contents Programme and Consumption 1 Safety Instructions ......Table ..........Intended Use ........ Programme Selection ....24 Safety of Children, Vulnerable Per- Programmes ........25 sons and Pets ......Temperature Selection ....28 Electrical Safety ......
Page 3
Please read this user manual first! Dear Customer, Thank you for choosing Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents care- fully before using the product.
Page 4
1 Safety Instructions This section includes the safety – Personnel kitchens of instructions necessary to pre- stores, offices and other vent the risk of personal injury or work environments; material damage. – Ranches, Our company shall not be held – By customers of hotels, mo- responsible for damages that tels and other accommoda- may occur if these instructions...
Page 5
with, climb on top or inside the • If the power cable is dam- product. Check inside the aged, it must be replaced by product before use. the authorised service in order • Use child lock to prevent chil- to avoid possible risks. dren from intervening with the •...
Page 6
make sure the electrical Handling Safety mains, clean water mains and • Unplug the product before water outlet are suitable. If not, moving, remove the water out- call a qualified electrician and let and water main connec- plumber to have them make tions.
Page 7
• Connect the product to a valve should be fitted. The grounding plug protected by a maximum allowed temperat- fuse suitable to the current val- ure is 25°C. ues on the type label. Make • Fit the end of the water dis- sure the grounding is carried charge hose to the dirty water out by an expert electrician.
Page 8
• Do not use chemical solvents • Do not force open the locked on the product. These materi- loading door. The door will als contain an explosion risk. open once the washing is • Do not operate defective or completed. If the door does damaged products.
Page 9
• Take the following precautions • Do not use sharp or abrasive to prevent formation of biofilm tools to clean the product. Do and malodours: not use household cleaners, soap, detergent, gas, gasol- – Make sure the room where ine, thinner, alcohol, varnish, the washing machine is etc.
Page 10
ate the locking mechanism of the loading door before disposing of the product for chil- dren’s safety. 2.2 Package Information Packaging materials of the product are man- ufactured from recyclable materials in ac- cordance with our National Environment Regulations. Do not dispose of the pack- aging materials together with the domestic or other wastes.
Page 11
3 Technical Specifications Supplier’s name or commercial brand Beko CM 10140 BM Model name 7178520400 Nominal Capacity (kg) Maximum spin speed (cycle/min) 1400 Built-In Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet + / -...
Page 12
4 Installation • Total weight of the washing machine and Please read the “Safety Instructions” the dryer -with full load- when they are section first! placed on top of each other reaches to approx. 180 kilograms. Place the product Your washing machine automatically on a solid and flat floor that has sufficient detects the amount of laundry load carrying capacity.
Page 13
Cover B NOTICE Keep the transportation safety bolts in a safe place to reuse when the product needs to be moved again in the future. Install the transportation safety bolts in reverse order of the disassembly procedure. Never move the product without the transportation safety bolts properly Rest the tabs of Cover B against the lower fixed in place.
Page 14
longer than 3.2 m. To prevent water 4.5 Connecting the Drain Hose to leaks, always secure the connection the Drain between the extension hose and the a. Attach the end of the drain hose directly draining hose of the product with a suit- to waste water drain, washbasin or able clamp so that it does not come off bathtub.
Page 15
• If the current supply to the fuse or breaker tion”. To prepare the product for washing in the house is less than 16 Amps, have a laundry, perform first operation in Drum qualified electrician install a 16 amp sup- Cleaning programme.
Page 16
The product automatically adjusts the water 5.3 Tips for Energy and Water Sav- amount according to the weight of the laun- dry put inside it. Following information will help you use the product in an ecological and energy/water- Follow the instructions in “Pro- efficient manner.
Page 17
• Do not leave the detergent drawer open Filling Liquid Detergent and Softener when the washing programme is on. a. Open the detergent compartment by • Do not select a programme with pre- pulling it towards yourself. washing if you are using a detergent pod or dispensing ball.
Page 18
5.6.2 Dosage Selections, Cancella- tion or Use of Powder Deter- gent We recommend filling the detergent com- partment with liquid detergents that can be used in common for coloured and white Liquid detergent cannot be selected in some of the programs. Powder detergent must be laundry.
Page 19
5.6.3 Detergent and/or Softener Liquid detergent and softener dosing symbols become active or inactive according to the program selected on Running Out the screen. When the detergent or the softener put in- First position on the display means liquid deter- side the detergent drawer finishes, the gent is active, softener is on.
Page 20
It may be necessary to Powder and liquid deter- pre-treat the stains or per- gents recommended for form prewash. colours can be used at Prefer liquid deter- dosages recommended Liquid detergents Powder and liquid deter- gents produced for heavily soiled clothes. suitable for colours gents recommended for for delicate...
Page 21
6.1 Control Panel 1 Programme Selection Button 2 Spin Speed Adjustment Button 3 Temperature Setting Button 4 Display 5 ON/OFF Button 6 Start/Pause Button 7 End Time Setting Button 8 Auxiliary Function Button 5 9 Auxiliary Function Button 4 10 Auxiliary Function Button 3 11 Auxiliary Function Button 2 12 Auxiliary Function Button 1 13 Remote Control Button...
Page 22
6.2 Symbols on the Display 1 Temperature Indicator 2 Wireless Connection Indicator 3 Remote Control Indicator 4 Programme follow-up indicator 5 Dosing Unit Indicator 6 Duration information 7 Programme Start Indicator 8 Delayed Start Enabled Indicator 9 Door Lock Engaged Indicator 10 Auxiliary function (Dosing) Indicators 5 11 Child Lock Engaged Indicator 12 Auxiliary Function Indicators 4...
Page 24
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine while The auxiliary functions in the table selecting a programme. Depending may vary according to the model of on the amount of laundry you have your machine.
Page 25
• Pamuklu Programmes are limited to the You can wash your durable cotton laundry highest spin speed appropriate for that particular type of fabric. (sheets, bedlinen, towels, bathrobes, under- wear etc.) in this programme. When the When selecting a programme, al- quick wash function button is pressed, pro- ways consider the type of fabric, col- gramme duration becomes notably shorter...
Page 26
• Buharlı Havalandırma Allergy UK is the brand of the British Use this programme to reduce the creases Allergy Association. Seal of Approval is created to guide people that re- and ironing times of a small amount of un- spotted cotton, synthetic or mixed laundry. quire recommendation about a product that the related product re- •...
Page 27
the loading door half closed after the pro- icate washing action. Wash your clothes gramme ends for the inside of the machine whose colour you want to preserve either at to dry. 20 degrees or by selecting the cold wash option.
Page 28
b. Select the stain you want to clean by loc- You can also change the temperature after ating it in the groups above and selecting the washing starts. This change can be the related group with the Quick/Intense made if the only washing steps allow it. auxiliary function button.
Page 29
If you want to drain the water at the end of When an auxiliary function button the programme without spinning, use No that cannot be selected with the cur- Spin function. rent programme is pressed, the washing machine will make a warn- No change can be made in pro- ing sound.
Page 30
the appropriate programme duration is • Otomatik Dozaj shown for your normally soiled clothes/laun- You can change your dosage and detergent dry. preferences with this auxiliary function but- Depending on the programme selection, the ton. For detailed information, see “Dosage Intensive feature can be selected automatic- Selections, Cancellation or Use of Powder ally.
Page 31
If you change the detergent model • Automatic Dosage Setting you use, we recommend that you You can use this function to change the dos- adjust the dosage again to achieve ing amounts of the Liquid Detergent and the best results. Softener.
Page 32
c. When dosage amount setting process is To activate wireless connection: completed, you can return to the main Press and hold Remote Control button for 3 menu by pressing the automatic dosage seconds. After countdown “3-2-1” on the key. For all programmes, dosing will be display ends, “On”...
Page 33
Make sure your appliance is connected If your product’s wireless network to the Internet and your phone number function is disabled, it will be en- is registered on HomeWhiz application. abled when you push on the support Press and hold the Support Service key service button.
Page 34
In order for the End Time function to be ac- 6.10 Starting the Programme tivated and the programme to be completed a. Press Start / Pause button to start the at the end of the specified time, you must programme. press Start/Pause button after adjusting the time.
Page 35
Opening the loading door in case of 6.12 Changing the Selections After power failure: Programme has Started Adding laundry after the programme has In case of power failure, you can use the loading door emergency handle started under the pump filter cap to open If the water level in the machine is suitable the loading door manually.
Page 36
6.14 End of Programme The selected programme starts anew. End warning appears on the display when the programme is completed. Changing the auxiliary function, speed The product automatically shuts down if no and temperature: buttons are pressed for 10 minutes. Display Depending on the step the programme has and all indicators are turned off.
Page 37
Function button simultaneously for 3 In order to use the HomeWhiz func- seconds to switch your machine to tion, the application must be in- HomeWhiz setup mode. stalled on your smart appliance, and your washing machine must be paired with your smart appliance via Bluetooth.
Page 38
You need internet connection on Since the HomeWhiz Feature and your smart device to proceed with Remote Control function on your ap- HomeWhiz setup. Otherwise, the pliance is operated via pairing using HomeWhiz application will not let Bluetooth technology only one you finish the setup procedure suc- Homewhiz application can operate it cessfully.
Page 39
If you turn off and on your machine while When the Remote Control is enabled, you bluetooth is active, it will automatically re- can only manage the machine, turn it off and connect. In cases such as paired device go- follow the status through your washing ma- ing off the range, bluetooth will automatically chine.
Page 40
d. If the connection cannot be established If the problem persists, consult an Author- with the above processes, repeat the ini- ised Service Agent. tial set-up settings on the washing ma- chine. 7 Maintenance and Cleaning • If the new softener has the same specific- Please read the “Safety Instructions”...
Page 41
7.2 Cleaning the Loading Door and the Drum For products with drum cleaning pro- gramme, please see the Operating the b. Remove the drain stick located at the product section. back of the drawer from its slot. Repeat Drum Cleaning process in c.
Page 42
In addition, prior to transporting the product 7.4 Cleaning the Water Intake Fil- (e.g., when moving to another house) water ters should be drained completely. There is a filter at the end of each water in- take valve at the rear of the product and also NOTICE: at the end of each water intake hose where Foreign substances left in the pump...
Page 43
• When the pump filter starts leaking water a. Clean any residues inside the filter as well loosen it by turning (opposite clockwise). as fibres, if any, around the pump im- Fill the running water to the container you peller region. placed in front of the filter.
Page 44
Product stopped shortly after the pro- • Input temperature of water is low. >>> Re- gramme started. quired time to heat up the water extends in cold seasons. Also, washing time can • Machine has stopped temporarily due to be lengthened to avoid poor washing res- low voltage.
Page 45
• Excessive foam has occurred and auto- • Excessive amount of detergent is used. matic foam absorption system has been >>> Put the detergent in the correct com- activated due to too much detergent us- partment. Do not mix the bleaching agent age.
Page 46
• Draining hose is folded. >>> Check the • Water pressure is low. >>> Check the wa- drain hose. ter pressure. • The detergent in the main wash compart- Laundry became stiff after washing. (**) ment got wet while taking in the prewash •...
Page 47
When you use additional chemicals (stain (**) Regular drum cleaning is not applied. removers, bleaches and etc.), reduce the Clean the drum regularly. See Cleaning the amount of detergent. Loading Door and the Drum [} 41] Laundry remains wet at the end of the If you cannot eliminate the problem programme.
Page 49
9 DISCLAIMER / WARNING Some (simple) failures can be adequately The Beko shall not be held responsible for handled by the end-user without any safety any safety problems that may arise due to issue or unsafe use arising, provided that...
Need help?
Do you have a question about the CM 10140 BM and is the answer not in the manual?
Questions and answers