Download Print this page

Soundoff Signal Golight EWL9111SL Manual

Remote spotlight kit, left-hand/right-hand

Advertisement

Quick Links

WARNING
• HIGH CURRENT interconnects must be properly terminated. Poor crimp quality can
cause heat build-up and fire. Follow crimp connector manufacturer instructions.
• DO NOT install this product or route any wires in the Air Bag Deployment Zone. Refer to
vehicle Owner's Manual for deployment zones.
• Do NOT use system to disconnect headlights, brake lights or other safety equipment.
• Unit may become hot to touch during normal operation.
• Failure to properly install connectors, fuses or wiring may cause vehicle failure or fire.
Installation must only be performed by trained technician. Installer must determine vehicle
wiring configuration and proper integration of system.
• Use proper wire gauge. All power wires connecting to positive (+) or negative (-) battery
terminal or local chassis ground (-) must be sized to supply at least 125% of max. current
and properly fused at power source.
• Install protective grommets when routing wire through firewall or metal.
1.800.338.7337 / www.soundoffsignal.com
GOLIGHT
REMOTE SPOTLIGHT KIT
®
EWL9111SL - LEFT-HAND SPOTLIGHT KIT
EWL9114SL - RIGHT-HAND SPOTLIGHT KIT
"GOLIGHT®" is a registered trademark of Golight, Inc; Culbertson, NE
NOTICE:
If you have questions regarding the technical support of bluePRINT for this product, contact Soundoff Signal Technical
Services, Monday - Friday, 8 a.m. to 5 p.m. ET at 1.800.338.7337 (press #4). Questions or comments that do not require
immediate attention may be emailed to techservices@soundoffsignal.com.
If you have questions regarding the technical details, installation and/or warranty & returns for this product, contact Golight,
Monday - Friday, 8 a.m. to 5 p.m. CT at 1.800.557.0098. Questions or comments that do not require immediate attention may
be emailed to 911@golight.com.
E N H A N C I N G S A F E T Y T H R O U G H I N N O VAT I O N
CONTENTS . . . . . . . . . . . . . . . . . . . . 2
INSTALLATION INSTRUCTIONS . . . . 2
TOOLS LIST . . . . . . . . . . . . . . . . . . . . . 2
INSTALLATION IMAGES . . . . . . . . . . 3-4
OPERATION INSTRUCTIONS . . . . . . . 5
WARRANTY INFORMATION . . . . . . . . . 6
WARNING
!
ROUTE WIRES ONLY IN LOCATIONS THAT ARE NOT SUBJECTED TO
POTENTIAL WEAR. MAKE SURE TO AVOID ROUTING WIRES IN THE
DEPLOYMENT AREA OF YOUR AIR BAG. REFER TO YOUR VEHICLE'S
OWNER'S MANUAL FOR AIRBAG DEPLOYMENT ZONES.
GOLIGHT REMOTE SPOTLIGHT 0724
®
0000KP REV A

Advertisement

loading
Need help?

Need help?

Do you have a question about the Golight EWL9111SL and is the answer not in the manual?

Questions and answers

Summary of Contents for Soundoff Signal Golight EWL9111SL

  • Page 1 "GOLIGHT®" is a registered trademark of Golight, Inc; Culbertson, NE NOTICE: If you have questions regarding the technical support of bluePRINT for this product, contact Soundoff Signal Technical Services, Monday - Friday, 8 a.m. to 5 p.m. ET at 1.800.338.7337 (press #4). Questions or comments that do not require immediate attention may be emailed to techservices@soundoffsignal.com.
  • Page 2 INTRODUCTION: CONTAINS ITEM Thank you for purchasing the Golight Remote Spotlight Kit. COMPONENT QTY. QTY. The following instructions are written specific to the left-hand (LH) spotlight, but also apply to the right-hand (RH) spotlight LH SPOTLIGHT unless otherwise specified. RH SPOTLIGHT ARM COVER WITH M3-0.5 x 6MM SCREW In general, the steps below cover the wiring and installation of the side specific spotlight.
  • Page 3 FIG. 1 FIG. 2 002HN851 FIG. 3 FIG. 4 FIG. 5 NOT TO SCALE FIG. 6 106.2 mm 68.0 mm M3-O.5 MOUNTING BOSSES GOLIGHT REMOTE SPOTLIGHT 0724 0000KP REV A 1.800.338.7337 / www.soundoffsignal.com...
  • Page 4 FIG. 7 FIG. 8 002HN853 FIG. 10 FIG. 9 002HN851 002HN852 FIG. 12 FIG. 11 002HN836 GOLIGHT REMOTE SPOTLIGHT 0724 0000KP REV A 1.800.338.7337 / www.soundoffsignal.com...
  • Page 5 OPERATION: NOTE: Prior to beginning the steps below, install the 4. The ‘On-Off’ button will turn the lamp on-off. 5. Pressing the ‘Ready’ button will pan and tilt the light to vehicle-specific bracket and adapter using instructions a user-programmed position and turn the lamp on. To included with those components.
  • Page 6 PRODUCT SAFETY WARNINGS: WARNING: You risk death or serious injury to yourself and others if you do not follow the instruction highlighted by the warning symbol. Failure to follow the specific warnings and instructions could result in personal injury, fire or electrical shock.

This manual is also suitable for:

Golight ewl9114sl