Advertisement
Quick Links
Advertisement
Related Manuals for MO-SYS L40
Summary of Contents for MO-SYS L40
- Page 1 MO-SYS L40 818-806-9386 info@treefortent.com @treefortentertainment www.treefortentertainment.com...
- Page 2 TREEFORT ENTERTAINMENT MO-SYS L40 The L-40 is a light weight 2-axis head for high-end digital cinematography is ideal for medium sized camera packages, for example ARRI Alexa with a large zoom lens, such as Optimo 12:1 or Panavision 12:1. At the core of the L-40 is a highly robust and precise motor drive with zero backlash, providing lag-free operation.
- Page 3 User Manual 2023 INNOVATORS FOR VIRTUAL PRODUCTION & IMAGE ROBOTICS...
- Page 4 Table of Contents Contents Specifications ............................2 System Overview ............................ 3 System Architecture ..........................3 L40 Setup ..............................1 General Setup ............................. 1 Radio Kit Setup ............................ 1 Typical Radio Setup ..........................2 Balancing ............................. 2 Console Instructions ..........................3 Navigation Menu..........................
- Page 5 Specifications 40kg Maximum Load 180° /Second Maximum Speed 18kg Weight of Head Power (PSU 110-200v) Dimensions: Scale 1:10 Measurements in (mm)
- Page 6 The kit also includes: backpan and an optional roll axis. The lattice • PanBar designed L40 can hold a max payload of 40kg • and a max speed of 180 degrees / second. 3x Mo-Sys BUS Cables This manual will guide you through the basics •...
- Page 7 Two BUS connectors are provided on the back • of the console. One BUS Cable can be used to PSU (10A) connect the console to the L40 head, and The other network might have: another BUS cable connects to the input device (handwheels).
- Page 8 L40 Setup Typical Radio Setup Balancing The L40 has very strong motors but it is a good idea to balance the camera to reduce power consumption and reduce risk of damage to camera/lens in event of power failure. Balance the camera package >...
- Page 9 Lock - [ON/OFF] This will lock the L40's axis so Within the three Axis': Pan, Tilt and Roll, that they cannot be physically moved, the different paraments can be adjusted.
- Page 10 To change your input device, navigate to the Backpan Drift Calibration: The L40 is fitted correct bus number and press down on the with a high precision gyro to sense and third knob.
- Page 11 Advanced Instructions The advanced settings are for advanced users only. Improper use of these settings could cause damage to your L40 head. Be sure to make a note of the values before changing them in case you need to go back! PID: These are parameters to adjust the motor control of the L40.
Need help?
Do you have a question about the L40 and is the answer not in the manual?
Questions and answers