Immergas JULIUS 11 4 ERP Instruction And Recommendation Booklet

Hide thumbs Also See for JULIUS 11 4 ERP:

Instruction and recommendation booklet (20 pages)

page of 20

/ 20
Bookmarks

Quick Links

Download this manual

JULIUS 11 4 ERP

Instruction and

recommendation booklet

JULIUS 14 4 ERP

Need help?

Do you have a question about the JULIUS 11 4 ERP and is the answer not in the manual?

Questions and answers

Summary of Contents for Immergas JULIUS 11 4 ERP

Page 1 JULIUS 11 4 ERP Instruction and recommendation booklet JULIUS 14 4 ERP...
Page 3 Dear Customer, Our compliments for having chosen a top-quality Immergas product, able to assure well-being and safety for a long period of time. As an Immergas customer you can also count on a quali ed a er-sales service, prepared and updated to guarantee constant e ciency of your water heater. Read the following pages carefully: you will be able to draw useful suggestions regarding the correct use of the appliance, the respect of which, will con rm your satisfaction for the Immergas product.
Page 4 INDEX INSTALLER USER MAINTENANCE TECHNICIAN page page page Water heater installation ......5 Use and maintenance instructions ..9 Checks and maintenance .......11 1.1 Installation recommendations....5 2.1 Cleaning and maintenance...... 9 3.1 Hydraulic diagram........11 1.2 Main dimensions........6 2.2 Ventilation of the rooms.
Page 5 Immergas accessories must have suitable cal compartments under the responsibility of features (technical and structural) such to allow...
Page 6 N.B.: e appliance is supplied by Immergas of maximum generator output and to guarantee of any waste from the walls during functioning, with one battery placed horizontally on the bat- appliance e ciency (technical speci cations).
Page 7 extremely dangerous situations for the user. power range from 4 to 35 kW, provided the - ensure that the chimney safety device inter- e ue ducts must be connected to the chimney conditions as per the current technical standards venes in the event of gas supply failure and or ue in the same room in which the appliance are respected.
Page 8 1.12 WATER HEATER COMPONENTS. Key: 9 - Overheating safety thermostat 1 - Fumes hood 10 - Valve/burner pipe pressure point 2 - Detection electrode 3 - Pilot burner 11 - Gas selector 4 - Ignition electrode 12 - Temperature selector switch 13 - DHW heat exchanger 5 - Ignition and ame control P.C.B.
Page 9 USE AND MAINTENANCE company veri es the e ciency of the ducting - if the appliance is not to be used for a certain or the devices. period, it is good practice to disconnect the INSTRUCTIONS Never clean the appliance or connected parts power supply batteries.
Page 10 2.6 DESCRIPTION OF THE 2.8 REPLACING THE BATTERIES. 2.9 EMPTYING THE WATER HEATER. ANOMALIES. The batteries that power this appliance are To empty the water heater, close the cold water Ignition block. The water heater ignites au- housed in the lower part of the water heater, near inlet valve and open the hot water valve lower tomatically with each demand for hot water to the hydraulic connections.
Page 11 CHECKS AND MAINTE NANCE 3.1 HYDRAULIC DIAGRAM. Key: 1 - Overheating safety thermostat 2 - Valve/burner pipe pressure point 3 - Valve intake diaphragm 4 - Connection pipe pressure point 5 - Chimney safety thermostat 6 - Fumes hood 7 - DHW heat exchanger 8 - Pilot group 9 - Burner 10 - Water/gas valve...
Page 12 3.2 WIRING DIAGRAM. Key: 4 3 E1 - Ignition electrodes E2 - Detection electrode E3 - Safety thermostat E4 - Flue safety thermostat Y1 - Water/gas valve 4 2 1 Y2 - Pilot solenoid valve is cable as a red heat shrinkable lm 6 - White Y3 - Main shutter solenoid valve in the position indicated.
Page 13 3.7 REMOVING THE CASING. To facilitate water heater maintenance the casing can be completely removed as follows: 1) Loosen the lower screws (a) that x the lower protection grid (b) and the casing (c). 2) Release the casing (c) from the lower brackets (d) pulling the sides slightly outwards.
Page 14 3.8 VARIABLE HEAT OUTPUT. N.B.: gas ow rates refer to heating power below a temperature of 15°C and pressure of 1013 mbar. Burner pressure values refer to use of gas at 15°C. METHANE (G20) BUTANE (G30) PROPANE (G31) THERMAL THERMAL BURNER GAS PRESS.
Page 15 3.9 COMBUSTION PARAMETERS. Julius 11 4 ErP Gas nozzle diameter 1.30 0.77 0.77 supply pressure mbar (mm H 20 (204) 29 (296) 37 (377) Pilot nozzle diameter 0.26 0.22 0.22 Gas cone seats Gas cone inlet code 0864 0681 0681...
Page 16 3.10 TECHNICAL DATA. Julius 11 4 ErP Julius 14 4 ErP Nominal heat input kW (kcal/h) 22.8 (19621) 27.3 (23446) Minimum heat input kW (kcal/h) 9.0 (7725) 11.1 (9588) Nominal heat output (useful) kW (kcal/h) 20.1 (17286) 24.4 (20984) Minimum heat output (useful) kW (kcal/h) 7.8 (6708)
Page 17 3.12 PRODUCT FICHE IN COMPLIANCE WITH REGULATION 812/2013 . Julius 11 4 ErP Julius 14 4 ErP JULIUS 11 4 ERP JULIUS 14 4 ERP kW/h/annum GJ/annum kW/h/annum GJ/annum Parameter value Parameter value Annual fuel consumption for the domestic Annual fuel consumption for the domestic...
Page 18 3.13 PARAMETERS FOR FILLING IN THE make up the assembly (e.g. solar devices, integra- PACKAGE FICHE. tion heat pumps, temperature controllers). Should you wish to install an assembly, starting Use sheet g. 3-6 for “assemblies” related to the domestic hot water function (e.g.: water heater + from the Julius (11 4 o 14 4) ErP water heater, use the package che in Fig.
Page 19 Parameters for lling in DHW package assembly chart. Parameter Julius 11 4 ErP Julius 14 4 ErP ‘I’ ‘II’ ‘III’ * to be determined according to Regulation 812/2013 and transient calculation methods as per Notice of the European Community no. 207/2014.
Page 20 Follow us Immergas Italia immergas.com Immergas S.p.A. 42041 Brescello (RE) - Italy Tel. 0522.689011 Fax 0522.680617 Certi ed company ISO 9001...

This manual is also suitable for:

Julius 14 4 erp