1. Place layers of fabric under the presser foot so that the starting edges are under
the needle.
2. Line up the edge of your fabric with one of the guide lines beside the presser foot.
3. Lower the presser foot.
1. Turn the power switch ON or turn hand crank in the direction of the arrow.
2. Guide your fabric along the guide line you have chosen. Stitch to the edge of the fabric.
3. To end a seam, move power switch to OFF position. Turn hand wheel until needle is up,
raise presser foot and gently pull fabric back and out from under the presser foot.
Table of Contents
Junior Miss
How to place your fabric
How to start stitching
14
67B
Previous Page | Next Page