Caring For Your Machine; Removing And Replacing Bobbin Case - Singer 6233 Manual

SECTION 6 Caring forYour Machine
Removing and Replacing Bobbrn Case
C AU T I O N : B e f o r e c l e a ni ng o r a d j u st i n g
the machine, remove plug from the
socket outlet.
. Raise presser foot and needle.
. Open slide plate and remove bobbin.
o To remove the bobbin case, the needle
olate must be removed first.
. Lift needle plate (1) from right corner and
slide out from under foot.
To Remove Bobbin Case
o With a small screwdriver, turn lever (2)
back as far as it will go.
r Lift out bobbin case.
To Replace Bobbrn Case
. Guide forked end (3) of bobbin case
under feed (4).
. Draw rim of bobbin case under position
plate (5).
. Turn lever (2) toward you, locking bobbin
case in place,
NOTE: After locking case in place, be sure it
is not tight, but can move slightly.
r To replace needle plate, slide it under
pin (6) and push it to the left.
o Press needle plate down in place.
o Insert bobbin and close slide plate,
28