Page 2
VC3016NNDV 1400 W 1600 W 1.2 L 402 mm x 259 mm x 275 mm...
Page 16
Using and Cleaning the Sani Punch Using Cleaning VC3016NNDV 1400 W 1600 W 1.2 L 402 mm x 259 mm x 275 mm...
Page 19
Assembling and adjusting the Cleaner Flexible Hose Control button Cord winding Power switch Dual pipe Button Dusting Upholstery Dual pipe Crevice tool Sani Punch Brush Nozzle Adjusting the Cleaner Use it as shown in the diagram The flexible hose handle Press power switch has a manual air flow to start the vacuum...
Page 20
Using crevice tool, upholstery nozzle, dusting brush, corner nozzle and cleaning the corner nozzle Using crevice tool Using method Use it as shown in the diagram Nozzle, Crevice can be used for cleaning the place hard to reach. Using Dust Brush & Upholstery Nozzle Use it as shown Using method in the diagram...
Page 22
Check if the dust has settled in the dust separator. Separate the cover by holding its handle. Empty the separator. Remove the dust from the small holes cover of the separator.
Need help?
Do you have a question about the VC3016NNDV and is the answer not in the manual?
Questions and answers