Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for GMV Winlet 575
Summary of Contents for GMV Winlet 575
- Page 1 Translation of Original User Manual Version: 575S M2 2023-UK-1...
- Page 2 Local distributor & service partner: Manufactured by: GMV A/S Industriparken 1 DK-7182 Bredsten Denmark Tel.: +45 7573 8247 www.gmvas.dk Version: 575S M2 2023-UK-1...
- Page 3 Important! • Read these instructions carefully before use. • Familiarize yourself with the running and lifting characteristics of the window robot, and • how it behaves, before you start working with it, in order to be able to use it safely, securely and effectively. •...
- Page 4 CE – EU declaration of conformity Dear Customer Thank you for choosing a GMV A/S product. We have more than 25 years of experience in the construction and manufacturing industry as well as other industry. We develop, produce and sell equipment for materials handling designed for industrial use.
- Page 5 Safety instructions General • The window robot must be used as described in these instructions and in accordance with the general safety regulations applicable in the workplace and in the country where the Winlet 575S M2 is used. Always wear steel-capped safety footwear when working with the Winlet 575S M2. Depending on the workplace and the •...
- Page 6 Operation and safety Safety functions when driving Description Item. Designation 1 On/Off-switch - key contact / Emergency Stop 2 Battery indicator 3 Drive direction / speed regulator 4 Safety cut-out switch (stomach switch) 5 Vacuum gauges Winlet 575S M2 is equipped with a standard type of maneuvering handle. This incorporates a number of safety functions.
- Page 7 Safety functions when lifting and handling Description PSAC Panel Item Designation 1 Choice of hydraulic cylinder 2 LED indicator – cylinder 3 Activation of vacuum 4 LED indicator – vacuum level 5 LED indicator – overload 6 LED indicator – on/off (Blinks at low battery level) 7 Direction &...
- Page 8 The Winlet 575S M2 is equipped with an operating panel from which all vacuum and hydraulic functions are controlled. The integrated safety functions are: 2-button safety operation of the machine's vacuum system. Both buttons must be activated at once • either to pick up a load or to put down a load.
- Page 9 Driving Forward/reverse The speed is steeplessly controlled and is adjusted by turning the regulator to a greater or lesser degree. • Keep the operating arm in the normal position and then turn the drive direction and speed regulator to the desired position. Release the regulator to stop the machine. Braking •...
- Page 10 Lifting and handling Vacuum lift The Winlet 575S M2 is equipped with an integrated double-circuit vacuum system with intelligent vacuum monitoring, which gives an alarm to indicate insufficient vacuum level. The vacuum pump is equipped with Power Save, to save the batteries when there is sufficient vacuum. Using the vacuum function: Start the Winlet 575S M2 with the on/off button.
- Page 11 5. Tilting cylinder, which moves items from a horizontal floor – to a horizontal 6. Fine-adjustment cylinder, which moves the item in a 100% vertical line. The front of Winlet 575S M2 can also be moved on the side of the machine (right side) for easy access via door openings carrying glass elements.
- Page 12 The stated values are for reference. And based on a 100% level surface. The Winlet 575S M2 is equipped with load monitoring whereby a red LED flashes and on the operating panel when approaching the max. capacity in a given position. At this warning, all cylinders must be retracted. If you continue running the cylinders "outwards", the warning lamp will remain on constantly and an acoustic warning signal will sound.
- Page 13 Storage and lifting of Winlet 575S M2 After use, check the level of charge in the batteries via the battery indicator, and charge as required. • See below concerning instructions with regard to charging. Never use the Winlet 575S M2 when the battery indicator is lit up red. •...
- Page 14 Lifting weight: 700 kg Max stress steel 355 = 355N/mm2 SAFETY FACTOR: 355/75,75 =4,6 Lifting weight: 600/2 = 300 kg Max stress steel 355 = 355N/mm2 SAFETY FACTOR: 355/32,12 =11 Lashing during transport - Winlet 575S M2 Below is illustration and description of safe lashing of Winlet 575S M2 during transport on truck. Note that these guidelines are in accordance with International rules for lashing according to EN 12195-1 .
- Page 15 surface, which gives a distance of approximately 45 cm in front of the machine. Each lashing must be tightened with Tensile load of approximately 5 kN. Top (lashing 3 + 6) It is very important to lash ”sideways” – to prevent the machine “tilting over” sideways. Lashing should be done using the D-ring tie downs on the side of the boom tower.
- Page 16 Charging/batteries General • Never charge the Winlet 575S M2 if damage is evident on the battery charger connection cable. This could be fatal! Charging must always be done at the designated site, which must be dry and well-ventilated. At this •...
- Page 17 230V battery charger error messages If any of these error messages appear, the machine will not charge: YELLOW YELLOW RED/GREEN DESCRIPTION Low battery voltage or no battery connected. Battery temperature over 50°C Charging time error (timeout), the battery is probably too big for the charger.
- Page 18 Servicing by specialist personnel As a minimum requirement, a full overhaul must be carried out by specialist personnel every 12 calendar months. Contact GMV A/S for further information. Cleaning Clean the machine regularly with a damp sponge, brush or vacuum cleaner.
- Page 19 Main Cylinder The main cylinder has two grease nipples – one in top and one in bottom. Check and top up at each main overhaul (at least every 12 calendar months), and apart from that, during normal operating conditions, no additional lubrication should be anticipated.
- Page 20 Specifications: Max. load 575 kg Width 890 mm External length 1880 mm Weight 1.025/1.300kg Min. Extension 700 mm Max. Extension 1.800 mm Max. height of centre lifting yoke 3.600 mm Lateral displacement 100 mm Fine hoisting in tower 500 mm Rotation 180 degrees Suction cups...
- Page 21 CE – EU Declaration of conformity Manufacturer Company name: GMV A/S Address: Industriparken 1 Post code: DK-7182 Bredsten Tel.: +45 7573 8247 Responsible for the technical dossier Authorised to prepare the technical dossier: Jesper Faurskov GMV A/S Industriparken 1 DK-7182 Bredsten...
Need help?
Do you have a question about the Winlet 575 and is the answer not in the manual?
Questions and answers