Branick TCS-40 Installation Instructions

The TCS-40 is designed to aid in transporting
heavy tire stacks by taking strain off the operator. In
some instances, with shorter tire stacks, the cart
would be easier to operate with the support arms
stored away so the cart can be leaned further back.
Included Parts____________________________________________________________
1. Support Arm – Left (1)
2. Support Arm – Right (1)
3. U-bolt with nuts (6)
4. 1/4 Washer (12)
5. Spacing Guide (1)
Installation_______________________________________________________________
1. Unpack and remove kit from shipping
carton. Position the Tire Cart on its side.
Use a 4 x 4 block or the carton the kit
came in to help support the handle of the
cart (Figure 1).
2. Match one side of the TCS-40 Kit with the
side of the cart that is facing up, making
sure the arm is in the stored position
(Figure 2).
REV071224
MODEL TCS-40
Installation
Instructions
The TCS-40 is only intended for transport use. Do
not load or unload tires from the cart while
resting on the support arms. Doing so may result
in the cart moving or tipping forward, potentially
causing damage to the cart, surroundings, or
personnel.
Figure 1
Figure 2
Assembly
Information
WARNING
P/N: 81-0312