Subscribe to Our Youtube Channel
Related Manuals for Anderson AJ-310
Summary of Contents for Anderson AJ-310
- Page 51 PAGE 51 Appendix D - Specifications Measurement Error Limit • Type J, K, T, E, N, C T/C's and RTD ± 0.25% of reading plus 1 degree 25 degrees C • Type R, S, 8 T/C's ± 0.25% of span 25 degrees C •...
- Page 57 * For Vat Pasteurization systems refer to Technical Guide: AJ300 Program - °F /AJ300 Program - °C visit www.VatPasteurization.com Input shunt jumper positioning on the AJ MotherBoard must be set properly for RTD inputs, see picture below. 10018/ 2.0 / 2017-05-12 / GM / NA www.anderson-negele.com...
- Page 58 Verify recorder displays and pens are reading 92 degrees F or 33 degrees C +/- 5 degrees. If readings are within tolerance proceed to step 7 - If readings are outside of tolerance contact your Anderson-Negele dealer for technical support. 10018/ 2.0 / 2017-05-12 / GM / NA...
- Page 59 If readings are within tolerance the recorder is functioning properly – Simulator Boards can be removed, sensor wiring re-connected and system calibrated as needed. If readings are outside of tolerance contact your Anderson-Negele dealer for technical support. *For Vat Pasteurization systems refer to Technical Guide: AJ300 Vat Pasteurization System Calibration visit www.VatPasteurization.com...
Need help?
Do you have a question about the AJ-310 and is the answer not in the manual?
Questions and answers