Elemental Machines Element-B Installation Manual

Applicable Concoa Altos 2 Manifold System Monitor Models
 Altos 2
Package Contents
 Element-B
 Connection Cable
Safety Information
Review and abide by the safety information found in the Element-B and
Concoa Altos 2 Manifold System Monitor user manuals. Tidy connection cable
to prevent tripping hazards.
Installation Instructions
Receiving the Shipment
1. If this is your first time setting up the Elemental Machines system, you will receive an
email for your dashboard account verification. Save this email for when the devices arrive.
2. When devices are shipped, they will be added to your Elemental Insights Dashboard™
with default names. When you first log in you will see all your devices with a
'disconnected' status.
3. When devices arrive, carefully remove the contents from the packaging. If any of the
contents look damaged, please send a picture to help@elementalmachines.com.
4. If you have ordered multiple Element-B's, ensure the Element-B being used is configured
as Normally Closed (NC). This can be verified by checking the device label, the dashboard
under 'Machine Model', or the packing list sent with your shipment.
a. Element-B's can either be configured as Normally Closed (NC) or Normally Open (NO)
by our team here at Elemental Machines. Different assets require different
configurations. If you have ordered Element-B's for multiple assets, you may have a
mix and need to be aware of attaching the correctly configured device to the correct
asset.
772-00008 rev 01 Element-B, EB1 EB2 Concoa Altos 2
Manifold System Monitor Installation Guide
Element-B Installation Guide
For Concoa Altos 2 Manifold System Monitor
1/7
Models: EB1, EB2
Copyright © 2022 Elemental Machines
help@elementalmachines.com