Sunnydaze Decor NB-FPRHD39 Manual

Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
No. Parts
A Panel
B Bolt
C Nut
ASSEMBLY
DO NOT FULLY TIGHTEN THE NUTS & BOLTS BEFORE ASSEMBLING THE ENTIRE RIM.
1. Set Panels (A) upright and align the holes on the panels.
2. Connect the panels by hand-tightening 2x Bolt (B) and 2x Nut (C).
3. Repeat Steps 1 & 2 until all panels are connected.
4. Tighten all hardware using a Phillips screwdriver (not included).
FPRHD
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
FIRE PIT RIM
Assemble on a soft, clean surface to avoid scratching or damaging the finish.
Tools Required
Qty.
4
8
8
/ / Order/Customer Reference Number:
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
(not included)
Phillips Screwdriver
11/2020
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
WARNING
CHOKING HAZARD
item contains small parts that can
be swallowed by children. Keep
children away during assembly.
C B
— This
Page 1 / 2