Advertisement
Quick Links
Technical Support and E-Warranty Certificate www. vevor. com/support
COIL NAILER
MODEL:CN65
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for VEVOR CN65
Summary of Contents for VEVOR CN65
- Page 1 Technical Support and E-Warranty Certificate www. vevor. com/support COIL NAILER MODEL:CN65 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
- Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
- Page 3 Always wear ANSl approved safety goggles when working with tools and equipment. Wear eye protection. Wear ear protection. Wear dust masks Wear protective gloves. Technical Data Noise according to EN12549:1999 MODEL CN65 and EN ISO 4871 USA TYPE LpA=84dB A-weighted sound QUICK COUPLER EUROPE TYPE pressure level JAPAN TYPE...
- Page 4 1.2 Description/Features CN65 Coil nailer: Strong and light weight magnesium body, Drive standard 15 degree wire-collated and plastic nails from 1- 1/4” to 2- 1/2” long, both single firing and bump firing are available, steel contact safety with dual carbide inserts for less...
- Page 5 Special references 2.1 Instructions The following standard is applicable to fastener driving tools; EN792- 13: 2000+A1: 2008”Hand-held non-electric power tools-safety requirements – Part 13: Fastener driving tools” . This standard requires that - only those fasteners which are specified in the operating instructions (see TECHNICAL DATA)shall be used in fastener driving tools.
- Page 6 - fastener driving tools marked with an inverted equilateral triangle standing on one point may only be used with an effective safety yoke; - for the maintenance of fastener driving tools, only spare parts specified by the manufacturer or his authorized representative shall be used; - repairs shall be carried out only by agents authorized by the manufacturer or by other specialists, having due regard to the information given in the operating instructions;...
- Page 7 influence to the hand-arm-system when using the tool. An influence to the hand-arm-system when using the tool will for example depend on the gripping force, the contact pressure force, the working direction, the adjustment of energy supply, the workplace, the work piece support. 2.4 Safety of the fastener driving tool - Check prior to each operation that the safety and triggering mechanism is functioning properly and that all nuts and bolts are right.
- Page 8 ladders are used or where an unusual physical posture is adopted whilst moving (see Fig 3). Carry the fastener driving tool at the workplace using only the handle, and never with the trigger actuated. Take conditions at the workplace into account. Fasteners can penetrate thin work pieces or slip off corners and edges of workplaces, and thus put people at risk.
- Page 9 Fastener driving tools equipped with contact actuation must be marked with the symbol” Do not use on scaffoldings, ladders’ (see Fig.4) and shall not be used for specific application for example: - when changing one driving location to another involves the use of scaffoldings, stairs, ladders, or ladder alike constructions, e.g.
- Page 10 The compressor plant shall be adequately dimensioned in terms of pressure output and performance (volumetric flow) for the consumption which is to be expected. Line sections which are too small in relation to the length of the line (pipes and hoses), as well as overloading the compressor, will result in pressure drops.
- Page 11 the equipment and personal injury to the user or other people working in the vicinity of operation. 4.2 Connection to the compressed air system Ensure that the pressure supplied by the compressed air system does not exceed the maximum allowable pressure of the fastener driving tool. Set the air pressure initially to the lower value of the recommended allowable pressure (see TECHNICAL DATA).
- Page 12 2. Less noise will be produced, 3.A reduction in fastener driving tool wear will be achieved. Avoid triggering the fastener driving tool if the magazine is empty. Any defective or improperly functioning fastener driving tool must immediately be disconnected from the compressed air supply and passed to a specialist for inspection.
- Page 13 6 Troubleshooting (See Table 1) SYMPTOM PROBLEM SOLUTIONS 1. O-ring in trigger valve is damaged. 1. Check and replace O-ring. Air leak near 2. Trigger valve head are 2. Check and replace. top of tool or in damage. 3.Check and replace trigger trigger area 3.
- Page 14 1. Worn bumper or damaged 1. Replace bumper or pusher spring. spring. 2. Dirt in front plate. 2. Clean drive channel on front 3. Dirt or damage prevents plate. Tool skips fasteners from moving freely 3. Magazine needs to be fasteners.
- Page 16 Technical Support and E-Warranty Certificate www. vevor. com/support...
Need help?
Do you have a question about the CN65 and is the answer not in the manual?
Questions and answers
free nail jam
To fix a nail jam in a VEVOR CN65:
1. Disconnect the tool from the air supply.
2. Open the quick-release nose to access the jammed nail.
3. Remove the jammed nail using pliers if needed.
4. Check for any damaged nails or obstructions.
5. Close the nose securely.
6. Reconnect the air supply and test the tool.
Always wear safety gear when performing maintenance.
This answer is automatically generated