Subscribe to Our Youtube Channel
Related Manuals for Rozone Smartwasher PCS23
Summary of Contents for Rozone Smartwasher PCS23
- Page 1 PCS23 Smartwasher™ Operating Manual Rozone Ltd Queen Street, Darlaston, Wednesbury, West Midlands WS10 8JB Tel: +44 (0)121 526 8181 Fax: +44 (0)121 526 8182 E-mail: info@rozone.co.uk www.rozone.co.uk...
- Page 2 WEE Producer Registration Number:- WEE/JG0549ZR/PRO Please read and comply with these Proper Use instructions prior to the initial operation of your appliance. Retain these operating instructions for future reference or for The device is meant for manually cleaning subsequent possessors. In case of parts with a maximum weight of 100kg.
- Page 3 Grease and oily dirt is rinsed into the Application base unit and is then degraded by the microbes into carbon dioxide and water. The machine must be checked prior to use to ensure that it is in Safety Instructions proper working order and is operating safely.
- Page 4 Maintenance Switch off the Smartwasher™ and unplug from mains socket before carrying out any maintenance on the machine. Please wear appropriate safety gear such as safety goggles and gloves. Maintenance work should only be carried out by an approved customer service expert. Mobile appliances used for commercial purposes are subject to safety inspections.
- Page 5 Machine Components 1. Sink Top 2. Flo-Thru Brush...
- Page 6 Start Up Shutting Down Situate the Smartwasher™ on flat Switch the “Pump On/Off” switch to “Off”. stable ground. Remove the black sink tray Note Unpack the filter mat and place it In order for the bioremediation process to on top of the filter support grid with occur the temperature of the cleaning the blue side facing down and the solution must be maintained at 38°c for the...
- Page 7 Place new filter blue side down, white side up onto the filter correctly and safely. support grid. For information on spares and Replace the sink tray. accessories contact Rozone Ltd. Yearly Warranty Annual maintenance check on machine recommended. We will repair all machine appliance...
- Page 8 Troubleshooting Fault Possible Cause Solution By Whom No power to the Check electrical No lights on Electrician machine mains Microbes have been Replace filter mat Operator destroyed Too much oil has Poor cleaning result been put into the Add a bottle of Operator machine –...
- Page 9 P.A.T. Testing The Smartwasher™ machine is of a CLASS 1 construction and due to the weight of the machine when full should be classed as stationary. We recommend a minimum time of 12 months for combined testing and inspection and monthly for the formal visual inspection.
Need help?
Do you have a question about the Smartwasher PCS23 and is the answer not in the manual?
Questions and answers