Page 2
WEE Producer Registration Number:- WEE/JG0549ZR/PRO Please read and comply with these Proper Use instructions prior to the initial operation of your appliance. Retain these operating instructions for future reference or for The device is meant for manually cleaning subsequent possessors. In case of parts with a maximum weight of 100kg.
Page 3
the rinsing tray and in the underlying proper working order and is filter mat. operating safely. Grease and oily dirt is rinsed into the The machine must not be used in base unit and is then degraded by the hazardous locations. microbes into carbon dioxide and The appliance must be sited on water.
Page 4
Maintenance work should only be 10. Filter Support Grid 11. Pump “On/Off” Switch carried out by an approved customer service expert. 12. Green Power Indicator Light Mobile appliances used for 13. Red Low Fluid Indicator Light commercial purposes are subject 14.
Page 5
Start Up Shutting Down Situate the Smartwasher™ on flat Switch the “Pump On/Off” switch to “Off”. stable ground. Place the black plastic filter Note support grid into the sinktop. In order for the bioremediation process to Unpack the filter mat and place it occur the temperature of the cleaning on top of the filter support grid with solution must be maintained at 38°c for the...
Page 6
For information on spares and regulations. accessories contact Rozone Ltd. Rinse/jetwash the base unit in an appropriate wash area ie. Warranty equipped with an interceptor. Replace sinktop and tighten wing...
Page 7
This declaration shall cease to be valid if the machine is modified in any way without prior approval. Product: Machine designed Partscleaning using water based cleaning solutions. PCS25 Smartwasher™ Type: PCS28 Supersink Smartwasher™ Relevant 2006/95/EC EU Directives: 2004/108/EC...
Page 8
Troubleshooting Fault Possible Cause Solution By Whom No power to the Check electrical No lights on Electrician machine mains Microbes have been Replace filter mat Operator destroyed Too much oil has Poor cleaning result been put into the Add a bottle of Operator machine –...
Page 9
P.A.T. Testing The Smartwasher™ machine is of a CLASS 1 construction and due to the weight of the machine when full should be classed as stationary. We recommend a minimum time of 12 months for combined testing and inspection and monthly for the formal visual inspection.
Need help?
Do you have a question about the PCS25 Smartwasher and is the answer not in the manual?
Questions and answers