Advertisement
Quick Links
ALLEN+ROTH and logo design are
trademarks or registered trademarks
of LF, LLC. All rights reserved.
Purchase Date
Thank you for purchasing this ALLEN + ROTH product.
Questions, problems, missing parts?
Before returning, contact us on
Monday - Sunday or ascs@lowes.com.
SS23762
welcoming
•
sophisticated
OUTDOOR WALL LANTERN
866-439-9800, 8 a.m. - 8 p.m., EST,
1
•
inspiring
ITEM #5632010
5632011
MODEL #WLS144BK
WLM144BK
Español p. 10
ATTACH YOUR RECEIPT HERE
ADJUNTE SU RECIBO AQUÍ
APPROVED FOR USE
IN WET LOCATIONS
800192
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for LF ALLEN+ROTH WLM144BK
Summary of Contents for LF ALLEN+ROTH WLM144BK
- Page 1 APPROVED FOR USE IN WET LOCATIONS ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved. Purchase Date Thank you for purchasing this ALLEN + ROTH product. Questions, problems, missing parts? Before returning, contact us on 866-439-9800, 8 a.m.
- Page 2 TABLE OF CONTENTS Package Contents ............................. 2 Hardware Contents ............................ 3 Safety Information ............................3 Preparation ..............................4 Assembly Instructions ..........................5 Care and Maintenance ..........................5 Troubleshooting............................9 Warranty ..............................9 PACKAGE CONTENTS PART DESCRIPTION QUANTITY Fixture Mounting Plate (preassembled to fixture (A)) Washer (preassembled to mounting plate screw (D)).
- Page 3 HARDWARE CONTENTS (shown actual size) Machine Screw Qty. 2 SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS. DANGER • For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install or operate this product. Failure to do so could lead to fire, electrical shock or other injuries that could be hazardous or even fatal.
- Page 4 SAFETY INFORMATION WARNING • To avoid personal injury, the use of gloves may be necessary while handling fixture parts with sharp edges. • DO NOT suspend any fixture by the house wires. A fixture must always be mounted directly to an outlet box or to a mounting strap which is first attached to the outlet box.
- Page 5 ASSEMBLY INSTRUCTIONS Turn off circuit breakers and wall switch to the fixture supply line leads. DANGER: Failure to disconnect power supply prior to installation may result in serious injury or death. Remove existing fixture and disconnect all electrical wiring. Outlet Box Remove mounting plate (B) from fixture (A) by removing mounting plate screws (D) and washers (C) from the fixture (A).
- Page 6 ASSEMBLY INSTRUCTIONS 4. Attach mounting plate (B) to outlet box (not included) using the existing washers and Outlet Box outlet box screws or the machine screws (AA). NOTE: If the outlet box screws (not included required for your outlet box are of a different size than the machine screws (AA), consult with a licensed electrician before proceeding.
- Page 7 ASSEMBLY INSTRUCTIONS 5b. Connect BARE/GREEN ground wire from BLACK WHITE outlet box to BARE ground wire from fixture (A) with lever wire connector by lifting the lever of the connector up, inserting the wire into the connector and dropping the lever back down to lock the connection.
- Page 8 ASSEMBLY INSTRUCTIONS 7. Attach fixture (A) to mounting plate (B) using the mounting plate screws (D) and washers previously removed (Step 3, Page 5). NOTE: Before tightening mounting plate screws (D) completely, use level (not included) to check fixture (A) -- adjust if necessary. 8.
- Page 9 ASSEMBLY INSTRUCTIONS 10. After completing installation, caulk mounting surface of fixture (A) with silicone weather sealant (not included). WARNING: Failure to caulk fixture mounting surface with silicone weather sealant may result in water damage in outlet box, which may cause electrical malfunction or electrical shock.
Need help?
Do you have a question about the ALLEN+ROTH WLM144BK and is the answer not in the manual?
Questions and answers