Download Print this page

Advertisement

Quick Links

Dishwasher
SPV6YMX11E
[en]
User manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the SPV6YMX11E and is the answer not in the manual?

Questions and answers

Summary of Contents for Siemens SPV6YMX11E

  • Page 1 Dishwasher SPV6YMX11E [en] User manual...
  • Page 2 Table of contents Safety ..........   4 Cutlery drawer ........ 22 General information...... 4 Etagere ........... 23 Intended use........ 4 Folding prongs ....... 23 Restriction on user group.... 4 Basket heights........ 23 Safe installation ........ 4 Before using for the first time ..   24 Safe use ........... 6 Performing the initial configura- Damaged appliance ...... 8 tion.......... 24...
  • Page 3 Customer Service......   59 Terminate programme.... 34 Product number (E-Nr.), produc- Switching off appliance .... 34 tion number (FD) and consecut- Basic settings........    35 ive numbering (Z-Nr.) ..... 60 Overview of basic settings ..... 35 AQUA-STOP guarantee .... 60 Changing basic settings.... 38 Technical specifications....   60 Home Connect ......
  • Page 4 en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡...
  • Page 5 Safety en WARNING ‒ Risk of electric shock! ¡ Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
  • Page 6 en Safety WARNING ‒ Risk of injury! Hinges move when opening and closing the appliance door and can cause injury. ▶ If built-under or integrable appliances are not in a cavity so that one side is accessible, the hinge area must be covered at the side.
  • Page 7 Safety en WARNING ‒ Risk of injury! ¡ Leaving the appliance door open may result in injury. ▶ Only open the appliance door to load or unload tableware in order to prevent accidents, e.g. through tripping. ▶ Do not sit or stand on the appliance door when open. ¡...
  • Page 8 en Safety Damaged appliance WARNING ‒ Risk of electric shock! ¡ If the appliance or the power cord is damaged, this is danger- ous. ▶ Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured sur- face. ▶ Never pull on the power cord to unplug the appliance. Al- ways unplug the appliance at the mains.
  • Page 9 Safety en WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
  • Page 10 en Preventing material damage Only use the water hoses sup- ▶ Preventing material damage Preventing material dam- plied with the appliance or genu- ine spare hoses. Never re-use water hoses that ▶ have been used before. Preventing material damage Safe installation ¡...
  • Page 11 Environmental protection and saving energy en To prevent corrosion, do not use Zeolith drying ▶ sponge cloths on dishwashers The appliance features a Zeolith con- with a stainless steel front or tainer. Zeolith drying lets you save rinse such cloths thoroughly energy.
  • Page 12 en Installation and connection shortened. Sensors → "Overview of basic settings", The sensors adjust the programme Page 35 sequence and strength in the auto- matic programmes depending on the level and type of soiling. Installation and connection Installation and connec- The sensor has different sensitivity tion settings that can be changed in the basic settings.
  • Page 13 Installation and connection en ance, you must stop it from tipping Drinking water connection over, e.g. by screwing it to the wall or Connect your appliance to a drinking installing it under a continuous work- water connection. top that is securely connected to ad- jacent cabinets.
  • Page 14 en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 60.
  • Page 15 Familiarising yourself with your appliance en "Detergent" → Page 28 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 21 Bottom basket "Filter system" → Page 42 Filter system Dispenser for special salt Add special salt to the dispenser for special salt. → "Water softening system", Page 24 Tablet collecting tray During the wash cycle tablets automatically fall out of the detergent dispenser into the tablet collecting tray...
  • Page 16 en Familiarising yourself with your appliance "Switching on the appliance" → Page 32 ON/OFF button and reset button "Switching off the appliance" → Page 34 "Terminating the programme" → Page 34 "Programmes" → Page 18 Programme buttons Display The display shows information about the remain- ing running time or the basic settings. You can change the basic settings via the display and the setting buttons.
  • Page 17 Familiarising yourself with your appliance en button If you press for approx. 3 seconds, you can open the basic settings. → "Changing basic settings", Page 38 Depending on the appliance specifications...
  • Page 18 en Programmes Programmes Programmes You can find an overview of the pro- runtime will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending...
  • Page 19 Programmes en Programme: Programme sequence Additional func- tions Tableware: Reduced noise: → "Additional ¡ Cleaning mixed table- ¡ Pre-Rinse Silence 50 ware and cutlery. functions", ¡ Cleaning 50 °C Level of soiling: Page 20 ¡ Intermediate rinse ¡ Removing common ¡ Final rinse 35 °C household food remnants ¡...
  • Page 20 en Additional functions Press the right programme button. Additional func- → "Programmes", Page 18 tion Press the button for the relevant If you select this additional additional function. function, "automatic door → "Additional functions", Page 20 opening" → Page 35 in Press for 3 seconds. the "o:02" setting is deac- a The selected programme and the tivated.
  • Page 21 Features en Raise or lower the basket evenly to Top basket the right level. Arrange cups, glasses and small items of tableware in the top basket. Check that the basket is level on both sides. Release the levers. You can adjust the height of the top a The basket clicks into position.
  • Page 22 en Features To fold down a side shelf, push the lever forwards and fold down the side shelf ⁠ . Cutlery drawer Arrange cutlery in the cutlery drawer. To fold down the front prongs, push the lever forwards and fold down the prongs ⁠...
  • Page 23 Features en You can fold the prongs down to po- Etagere sition pans, bowls and glasses Use the cutlery shelf and space un- better. derneath for small cups and glasses Folding down prongs or for large items of cutlery, e.g. cooking spoons or serving cutlery. If you do not need the prongs, fold them down.
  • Page 24 en Before using for the first time Level Top basket Bottom basket 2 max. ø 18.5 cm 27.5 cm 3 max. ø 21 cm 25 cm "Set the amount of rinse aid to be Before using for the first time Before using for the dispensed."...
  • Page 25 Water softening system en Water hardness °E Hardness range mmol/l Setting value 13 - 15 Medium 1.9 - 2.1 H:03 16 - 20 Medium 2.2 - 2.9 H:04 21 - 26 Hard 3.0 - 3.7 H:05 27 - 38 Hard 3.8 - 5.4 H:06 39 - 62 Hard...
  • Page 26 en Water softening system Note: Only use special salt for ¡ The water hardness is 0 - 8 °E. dishwashers. You do not need to use special Do not use salt tablets. salt. Do not use table salt. Press ⁠ . Add the special salt to the dis- To open the basic settings, press penser.
  • Page 27 Rinse aid system en The consumption values specified Add rinse aid up to the max mark. are laboratory measurements determ- ined in accordance with the currently applicable standard and using the Eco 50° programme and the factory value of the water hardness is set to 16 - 20°E.
  • Page 28 en Detergent To save the settings, press starch and remove protein. Oxygen- for 3 seconds. based bleaching agents are generally used to remove coloured marks, e.g. tea or ketchup. Switching the rinse aid sys- tem off Note: Follow the manufacturer's in- structions for each detergent. If you find the rinse aid refill indicator Detergent Description...
  • Page 29 Detergent en Separate detergents Unsuitable detergents Separate detergents are products Do not use detergent which could that do not contain components other cause damage to the appliance or than detergent, e.g. powder deter- present a risk to health. gent or liquid detergent. With powder and liquid detergent the Detergent Description...
  • Page 30 en Tableware ¡ The function of rinse aid is limited Close the lid of the detergent dis- with combined detergents. You will penser. generally get better results using rinse aid. ¡ Use tablets with a special drying performance. Adding detergent To open the detergent dispenser, press the locking latch.
  • Page 31 Tableware en Damage to glass and table- Cause Recommendation ware The water temperat- Select a programme ure of the programme with lower temperat- Only put glasses and china in the is too high. ures. dishwasher if it is marked as dish- After the programme washer-safe by the manufacturer.
  • Page 32 en Basic operation To save resources, do not pre- Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin.
  • Page 33 Basic operation en Setting a programme Starting the programme To adjust the wash cycle to the soil- Press ▶ ing level of the tableware, select a a The programme has ended when suitable programme. the display shows "00h:00m". Press the right programme button. ▶...
  • Page 34 en Basic operation Terminate programme To end a programme early or to switch from a programme that has already started, you will need to can- cel it first. Open the appliance door. Press for approx. 4 seconds. Close the appliance door. a All displays light up. a As soon as the displays are off, the display shows "00h:01m"...
  • Page 35 Basic settings en Basic settings Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H:04...
  • Page 36 en Basic settings Basic setting Display text Selection Description EmotionLight EL:02 EL:00 - EL:02 Interior light. ¡ With the setting "EL:00"m the in- terior light is switched off. ¡ With the setting "EL:01", the in- terior light can be activated via the ON/OFF button.
  • Page 37 Basic settings en Basic setting Display text Selection Description Efficient Dry o:02 o:00 - o:02 Activate or deactivate automatic opening of the appliance door during the drying phase. If the function has been activated, the running time may increase. The following settings are possible: ¡...
  • Page 38 en Home Connect Tips Changing basic settings ¡ Please consult the documents sup- Open the appliance door. plied by Home Connect. Press ⁠ . ¡ Please also follow the instructions in the Home Connect app. To open the basic settings, press for 3 seconds. Note: Please note the safety precau- a The display shows H:xx.
  • Page 39 Home Connect  en With the help of the Home Connect Press ⁠ . ▶ App scan the QR code. If you open the appliance door, the function is automatically deactiv- ated. button lights up. Tip: To deactivate the function, press ⁠ . Remote Diagnostics Follow the instructions in the Customer Service can use Remote Home Connect app.
  • Page 40 en Cleaning and servicing ¡ Security certificate of the Wi-Fi Add detergent to the detergent dis- communication module (to ensure penser. a secure data connection). Select the programme with the ¡ The current software and hardware highest temperature. version of your appliance. → "Programmes", Page 18 ¡...
  • Page 41 Cleaning and servicing en Tip: You can get our tested and ap- Machine Care is a programme which proved Dishwasher Care and Ma- removes various deposits in one chine Cleaner for Dishwashers online washing cycle. Cleaning takes place at https://www.bosch-home.com/ in two phases: store or from customer service.
  • Page 42 en Cleaning and servicing Pull down the micro filter to re- Filter system move. The filter system removes coarse soiling from the dishwashing cycle. Press the locking catches gether and lift the coarse filter out ⁠ . Micro filter Fine filter Coarse filter Cleaning filters Soiling in the dishwashing water may...
  • Page 43 Cleaning and servicing en Insert the filter system into the ap- Pull up the lower spray arm to re- pliance and turn the coarse filter move. clockwise. Make sure that the arrow mark- ‒ ings match up. Check the outlet nozzles on the spray arms for blockages under running water and remove any for- eign bodies.
  • Page 44 en Troubleshooting Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 45 Troubleshooting en Fault Cause Troubleshooting Appliance door opens too Door is not correctly adjus- Adjust the appliance door as de- ▶ wide at the end of the pro- ted. scribed in the installation instruc- gramme. tions. The door gap must be at least 70 mm - 100 mm.
  • Page 46 en Troubleshooting Fault Cause Troubleshooting E:32-00 will light up altern- Unscrew the water connection. ately or indicator for water Remove the filter from the supply supply lights up. hose Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
  • Page 47 Troubleshooting en Fault Cause Troubleshooting E:90-01 will light up altern- Mains voltage is too low. This is not a fault on the appliance. ately. Contact an electrician. Have the mains voltage and elec- trical installation checked by an electrician. E:92-40 will light up altern- Filters are soiled or blocked.
  • Page 48 en Troubleshooting Fault Cause Troubleshooting Tableware is not dry. Water collects in recesses of Position tableware at an angle ▶ the tableware or cutlery. where possible. The combined detergent Use rinse aid to improve drying per- used has a poor drying per- formance.
  • Page 49 Troubleshooting en Fault Cause Troubleshooting Appliance interior still wet Not a fault. The condensa- No action required. after wash cycle. tion drying principle causes water droplets in the tub – they are indeed desirable here. The moisture in the air condenses on the inside walls, runs off and is pumped out.
  • Page 50 en Troubleshooting Fault Cause Troubleshooting Detergent residue in the ap- Lid of the detergent dis- Arrange tableware in the top basket pliance penser is blocked by items tableware so the tab collecting tray of tableware parts and will is not obstructed by tableware. → "Arrange tableware", Page 31 not open.
  • Page 51 Troubleshooting en Fault Cause Troubleshooting Stubborn white coatings are Detergent substances are Change your "detergent" ▶ → Page 28. present on tableware, inside deposited there. These coat- the appliance or the door. ings cannot generally be re- Clean the appliance mechanically. ▶ moved with chemicals. The hardness range is set in- Set the Water softening system to ▶...
  • Page 52 en Troubleshooting Fault Cause Troubleshooting Coloured coatings (blue, yel- You can remove deposits with "Mechanical cleaning" → Page 40 low, brown) that are difficult or impossible to remove are or a machine cleaning product. It present inside the appliance may not always be possible to com- or on stainless steel table- pletely remove deposits but they ware.
  • Page 53 Troubleshooting en Fault Cause Troubleshooting Removable streaks are Tableware has been pre- Only remove large remnants of food ▶ present on glasses, glass- cleaned too intensely. The and do not prerinse tableware. ware with a metallic appear- sensors chose a weaker pro- Adjust the sensitivity of the sensors.
  • Page 54 en Troubleshooting Fault Cause Troubleshooting Excessive formation of foam Detergent or appliance care Change the brand of detergent. ▶ occurs. product used causes excess- ive foaming. Home Connect problem Fault Cause Troubleshooting Connection to home net- WLAN on router is not act- Check the wireless network con- ▶...
  • Page 55 Troubleshooting en Fault Cause Troubleshooting → "Terminate programme", Water is left in the appliance ▶ at the end of the pro- Page 34 gramme. Appliance cannot be Software update is taking Wait until the software update has ▶ switched on or operated. place. finished.
  • Page 56 en Troubleshooting Fault Cause Troubleshooting All LEDs lit up or flashing. Electronics have detected a Press the main switch button for ap- fault. prox. 4 seconds. → "Controls", Page 15 The appliance is reset and restar- ted. If the problem occurs again: Switch off the appliance. ‒...
  • Page 57 Troubleshooting en Fault Cause Troubleshooting Knocking or rattling noise. With a small load the water Distribute the tableware evenly. ▶ jets directly strike against Load the appliance with more table- ▶ the tub. ware. Light items of tableware Position light items of tableware se- ▶...
  • Page 58 en Transportation, storage and disposal Insert the pump cover and press Clean wastewater pump down ⁠ . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned.
  • Page 59 Customer Service en Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely.
  • Page 60 en Technical specifications least 10 years from the date on from water damage, the appliance which your appliance was placed on must be connected to the power the market within the European Eco- supply. nomic Area. ¡ The liability guarantee is valid for the service life of the appliance.
  • Page 61 Declaration of Conformity en You can find more information about Subject: „OSSREQUEST“ your model online at The cost of performing your request https://eprel.ec.europa.eu/ . This web will be charged to you. This offer is address is linked to the official EU valid for three years from the date of EPREL product database.
  • Page 62 en Declaration of Conformity 5 GHz band (5150–5350 MHz + 5470–5725 MHz): Max. 100 mW UK (NI) 5 GHz WLAN (Wi-Fi): For indoor use only. 5 GHz WLAN (Wi-Fi): For indoor use only.
  • Page 64 Thank you for buying a Bosch Home Appliance! Register your new device on MyBosch now and profit directly from: • Expert tips & tricks for your appliance • Warranty extension options • Discounts for accessories & spare-parts • Digital manual and all appliance data at hand •...