Related Manuals for jcb JCB-CH150120PE
Summary of Contents for jcb JCB-CH150120PE
- Page 1 PETROL WOOD CHIPPER INSTRUCTION & USER MANUAL JCB-CH150120PE Original Instructions IM-CH150120PE-EN...
-
Page 2: Table Of Contents
Maintenance Schedule Oil Servicing Spark Plug Sediment Filter Storage Troubleshooting Specification Warranty, Manual Updates, Returns, Reviews & Spare Parts Contact Us Recycling and Disposal & Environmental Protection CE Declaration of Conformity UKCA Declaration of Conformity JCB-CH150120PE Instruction & User Manual... -
Page 3: Introduction
The safety precautions and warnings are to ensure your safety and protect you from harm or damage to the product. The information contained in this manual was accurate at the time of production, however Genpower Ltd & JCB may make modifications to the product without notification. JCB-CH150120PE... -
Page 4: General Warnings & Disposal
Smoking and Drugs Warning: NEVER smoke whilst operating the machine due to close proximity of flammable liquids. Also NEVER operate the machine under the influences of drugs including smoking and alcohol. JCB-CH150120PE Instruction & User Manual... -
Page 5: Safety Information
ALL MAINTENANCE other than that listed in this manual, should be carried out by professionally trained and • certified personnel. When using this machine for the first time and before actual work, you MUST learn how to handle the machine • from an experienced or skilled person. JCB-CH150120PE Instruction & User Manual... -
Page 6: Personal Safety
The operator or user must take all necessary precautions to ensure their own safety and that of others, especially on slopes or rough, slippery and unstable ground. JCB-CH150120PE Instruction & User Manual... -
Page 7: Inspect Your Machine
Keep the machine in good operating condition. Operating the machine in poor or questionable condition could • result in serious injury. Be sure all safety devices are in working order and warning labels are in place. These items are installed for your • safety. JCB-CH150120PE Instruction & User Manual... -
Page 8: Machine Specific Safety
NEVER use inside a confined space such as but not limited to a house, garage, large vehicle, boat or tent. • Never operate the machines near other machines which use flammable liquids as a fuel source. • Only use the machine outside far away from open windows, doors and vents. • JCB-CH150120PE Instruction & User Manual... -
Page 9: Fuel Safety
When fuel is spilled on yourself or your clothes, wash your skin and change clothes immediately. • ALWAYS clean up spills promptly using absorbent granules and a lidded bin. • JCB-CH150120PE Instruction & User Manual... -
Page 10: Fuelling/De-Fuelling & Storage
(such as a water heater, furnace, or clothes dryer). Allow the engine to cool before storing in any enclosure. Replace all fuel tank and container caps securely and wipe up spilled fuel. Never operate the unit without the • fuel cap securely in place. JCB-CH150120PE Instruction & User Manual... -
Page 11: Features
Features JCB-CH150120PE Instruction & User Manual... -
Page 12: Feature Descriptions
N – Fuel Tank M – Recoil Starter Outlet chute switch. This detects if the chute is open or closed during operation. It prevents the machine running whilst the outlet chute is open. JCB-CH150120PE Instruction & User Manual... -
Page 13: Assembly
A – Tow Bar B – Leg Stand C – Inlet Chute D – Main body and Engine E – Outlet Chute F – Frame Bracket G – Battery and Tray H – Axle and Wheels JCB-CH150120PE Instruction & User Manual... -
Page 14: Axle And Wheels
Axle and Wheels This machines requires at least 2 people for the assembly, as components are heavy. Attach the Axle and Wheels (H) of to the bottom of the Main Body (D) as shown below. JCB-CH150120PE Instruction & User Manual... -
Page 15: Frame Bracket
Assembly Frame Bracket Attach the Frame Bracket (F) to the front of the Main Body (D) as shown below. JCB-CH150120PE Instruction & User Manual... -
Page 16: Leg Stand
Assembly Leg Stand Attach the Leg Stand (B) to the Frame Bracket (F) as shown below. JCB-CH150120PE Instruction & User Manual... -
Page 17: Inlet Chute
Assembly Inlet Chute Attach the Inlet Chute (C) to the rear of the Main Body (D) as shown below JCB-CH150120PE Instruction & User Manual... -
Page 18: Outlet Chute
Assembly Outlet Chute Attach the Outlet Chute (E) to the Main Body (D) as shown below. JCB-CH150120PE Instruction & User Manual... -
Page 19: Tow Bar
Assembly Tow Bar *NOTE* - The Tow bar is only suitable for off road use. Attach the Tow Bar (A) to the Frame Bracket (F) as shown below. JCB-CH150120PE Instruction & User Manual... -
Page 20: Battery Tray
Assembly Battery Tray Attach the Battery Tray (G) to the Main Body (D) as shown below. Instructions on how to connect the battery to machine follow on the next page. JCB-CH150120PE Instruction & User Manual... -
Page 21: Safety Cut Off
When assembly is complete YOU MUST ensure the Safety Cut Off is connected from the Inlet Chute (A) to the Engine as shown below. Battery Connection For machines with electric Start, ensure the battery is connected according to the below example JCB-CH150120PE Instruction & User Manual... -
Page 22: Pre-Operation Checks
WARNING! Operating the engine without an air filter, or with Carburettor a damaged air filter, will allow dirt to enter the engine, body causing rapid engine wear. This type of damage is not covered by the Distributor’s Limited Warranty. JCB-CH150120PE Instruction & User Manual... -
Page 23: Check Fuel Level & Recommended Fuel
Petrol/Gasoline is highly flammable, volatile and corrosive. You can be burned or seriously injured when handling fuel. NEVER fill above the Maximum Fuel Level. Standard E10 and E5 are both suitable for use with this machine Maximum Fuel Level JCB-CH150120PE Instruction & User Manual... -
Page 24: Operation
> Operator Area – These areas are where you can safely stand when feeding material into the machine > Infeed – This is where you should load the machine. > Outlet Area – This is where you can safely direct the outlet from the machine. Operator Area Outlet Infeed Area Operator Area JCB-CH150120PE Instruction & User Manual... -
Page 25: Starting
To start a cold engine, move the choke lever to the CLOSED position. To restart a warm engine, leave the choke lever in the OPEN position. > Move the throttle lever away from the SLOW position about 1/3 of the way toward the FAST position. Fuel Valve Lever Choke Lever Throttle Lever JCB-CH150120PE Instruction & User Manual... - Page 26 Engine output is controlled by adjusting engine speed. Moving the throttle lever in the FAST direction will increase engine output, and moving the throttle lever in the SLOW direction will decrease engine output. Recoil Starter Grip Ignition Barrel and Key Choke Lever Throttle Lever Slow Open Fast JCB-CH150120PE Instruction & User Manual...
- Page 27 Pump output is controlled by adjusting engine speed. Moving the throttle lever in the FAST direction will increase pump output, and moving the throttle lever in the SLOW direction will decrease pump output. Ignition Switch Recoil Starter Grip Throttle Lever Choke Lever Slow Fast Open JCB-CH150120PE Instruction & User Manual...
-
Page 28: Stopping
> Move the throttle lever to the SLOW position. > Turn the ignition switch to the OFF position. > Turn the fuel valve lever to the OFF position. Throttle Lever Slow Fuel Lever JCB-CH150120PE Instruction & User Manual... -
Page 29: Wood Chipping
Aim the outlet chippings into a suitable outlet area as shown below. IF the machine stalls, turn off the engine and clear the obstruction. NEVER try this whilst the machine is operating. Operator Area Outlet Infeed Area Operator Area JCB-CH150120PE Instruction & User Manual... -
Page 30: Maintenance
Carbon monoxide poisoning from engine exhaust. Be sure there is adequate ventilation whenever you operate the engine. －Burns from hot parts. Let the engine and exhaust system cool before touching. －Injury from moving parts. JCB-CH150120PE Instruction & User Manual... -
Page 31: Maintenance Schedule
Every 100 interval. Each Use Hours Hours Hours Check Engine Oil Level Check General Machine Condition Check Belts Check Tire Pressure Clean Engine Change Engine Oil First 5 hours Replace Air Filter Replace Spark Plug JCB-CH150120PE Instruction & User Manual... -
Page 32: Oil Servicing
SJ, SL, or equivalent. SAE 15W-40 is recommended for general use. Other viscosities shown in the chart may be used when the average temperature in your area is within the indicated range. JCB-CH150120PE Instruction & User Manual... -
Page 33: Spark Plug
After properly seated, fully tighten using spark plug wrench. > When the washer has started to compress tighten to the following instruction: 1. New Sparkplug – a 1/2 Turn tight 2. Re-used Spark Plug – a 1/8 to 1/4 Turn tight JCB-CH150120PE Instruction & User Manual... -
Page 34: Sediment Filter
Place the O-ring in the fuel valve, and install the sediment cup. Tighten the sediment cup securely. > Move the fuel valve to the ON position, and check for leaks. Replace the O-ring if there is any leakage. Fuel Valve Lever O-Ring Washer/Gasket Drain Bolt Sediment Cup JCB-CH150120PE Instruction & User Manual... -
Page 35: Long Term Storage
Pull the starter grip several times to distribute the oil around the cylinder walls. > Reinstall the Sparkplug. Pull the starter cord until resistance is felt. This ensures the valves are closed preventing moisture build up. > Return the recoil grip gently. JCB-CH150120PE Instruction & User Manual... -
Page 36: Troubleshooting
3. Take engine to an Fuel filter clogged, carburettor Replace or repair faulty authorized servicing dealer, or malfunction, ignition components as necessary. Refer to shop manual. malfunction, valves stuck, etc. JCB-CH150120PE Instruction & User Manual... -
Page 37: Specification
Specifications Model JCB-CH150120PE Maximum Material Diameter 120mm Maximum Material Width 150mm Chipping Capacity 4-6 CBM/hour Blade Type Twin Reversible Blades 3600 RPM Blade RPM 440x588 Inlet Hopper Opening Dimensions (mm) 167x278 Infeed Throat Opening Dimensions (mm) 4-Stroke OHV single Cylinder... -
Page 38: Ordering Spare Parts
We reserve the right to make any modifications without prior notice whenever necessary. Our latest manuals are also placed online. All our manuals can be downloaded at: www.jcb-tools.co.uk Returning Your Product If you are returning your product, please contact the dealer for their returns policy. -
Page 39: Contact Us
Our friendly aftersales team will be more than happy to help you. Phone Call our team on 01646 687 880 Email aftersales@Genpower..co.uk Post JCB Tools, Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW. Support Website Go to www.jcb-tools.co.uk JCB-CH150120PE Instruction & User Manual... -
Page 40: Recycling And Disposal & Environmental Protection
> You must comply with local regulations for the disposal of waste materials after mowing. > When disposing, do not pollute the environment with the machine, but hand it over to a disposal centre, in accordance with the local laws in force. JCB-CH150120PE Instruction & User Manual... -
Page 41: Ce Declaration Of Conformity
The person authorized to compile this technical file: Date: 01/12/2022 Signature Name/ title: Roland.J.Llewellin / Managing Director JCB Tools are a Licensee of J.C.Bamford Excavators ltd, operated via Genpower ltd. Address: Genpower Ltd, 77 Lower Camden Street, Dublin, D02 XE80, Ireland JCB-CH150120PE... -
Page 42: Ukca Declaration Of Conformity
The person authorized to compile this technical file: Date: 01/12/2022 Signature Name/ title: Roland.J.Llewellin / Managing Director JCB Tools are a Licensee of J.C.Bamford Excavators ltd, operated via Genpower ltd. Address: Genpower Ltd, 77 Lower Camden Street, Dublin, D02 XE80, Ireland JCB-CH150120PE...
Need help?
Do you have a question about the JCB-CH150120PE and is the answer not in the manual?
Questions and answers