Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Lippert Lewmar 2024028464
Summary of Contents for Lippert Lewmar 2024028464
- Page 1 Motor Mounting Bracket for Shallow Water Anchors Installation Guide REV: 08.082024 CCD-0008070...
- Page 2 Parts List Motor Mounting Bracket Kits, Black Letter Part Description Qty. 2024028464 Motor Mounting Kit, Black 2023012932 Motor Mount Adapter Plate, Black 2023020740 Motor Mount Adapter Plate Shim, Black 2023017309 SWA Mounting Kit 2023015256 Screw, Hex HD, 3/8”-16 x 2” 2023015228 Nut, Brass, 3/8”-16 2023015252...
- Page 3 Parts List Motor Mounting Bracket Kits, White Letter Part Description Qty. 2024028467 Motor Mounting Kit, White 2023017455 Motor Mount Adapter Plate, White 2023020741 Motor Mount Adapter Plate Shim, White 2023017309 Motor Mounting Hardware Kit 2023015256 Screw, Hex HD, 3/8”-16 x 2” 2023015228 Nut, Brass, 3/8”-16 2023015252...
- Page 4 Resources Required ∆ 3/4” ∆ wrench arine grade sealant (3M 5200 or similar) ∆ 3/4” socket with ratchet ∆ Engine Hoist/Lift Preparation Support outboard engine according to manufacturer’s recommendations. Installation Single-Mount 1. Using the 3/4” wrench and socket/ratchet, fully remove engine bolts (Fig.
- Page 5 4. Insert the Motor Mount Adapter Plate (Fig. 2A) between the motor’s mounting bracket (Fig. 2B) and the boat’s transom (Fig. 2C). 5. Align the adapter plate slots with the motor’s mounting bracket bolt holes. 6. Reinstall the previously removed (step 1) motor mounting bolts. 7.
- Page 6 8. Using the 3/4” wrench and socket/ratchet, fully remove the remaining set of engine bolts from the side opposite of where the anchor will be mounted (Fig. 3A). 9. Apply Marine-grade sealant around all of the exposed bolt holes. 10. Install the shim between the engine and transom (Fig. 3B). 11.
- Page 7 12. Make any final height adjustments for the Engine Mount Bracket then torque all bolts to manufacturer’s recommendations. Installed Single-Mount Lewmar Engine Mounting Bracket (Fig. 4A). Fig. 4 CCD-0008070 REV: 08.08.2024 Page 7...
- Page 8 Dual-Mount Follow all Single-Mount instructions except for step 10; install a second (separately purchased) Motor Mount Adapter Plate (Fig. 5A) instead of the shim. Fig. 5 CCD-0008070 REV: 08.08.2024 Page 8...
- Page 9 Installed Dual-Mount Lewmar Motor Mount Bracket Kit (Fig. 6A). Fig. 6 CCD-0008070 REV: 08.08.2024 Page 9...
- Page 10 Mount Anchor to Adapter Plate 1. Align the holes of the anchor’s mounting bracket (Fig. 7A) with the slots of the Motor Mount Adapter Plate (Fig. 7B). 2. Use the mounting hardware kit (2023017309) supplied with the Motor Mounting Bracket Kit and instructions supplied with the Shallow Water Anchor to mount the anchor to the Motor Mount Adapter Plate.
- Page 11 CARE AND MAINTENANCE When preparing to trailer or store the boat, take precautions to protect the anchor(s) from possible damage. 1. Make sure the anchor(s) is/are fully retracted. 2. Periodically inspect the Motor Mounting Adapter Plate(s), shim, wire harnesses and electrical connections for damage or loose or missing parts.
- Page 12 T: 432-LIPPERT (432-547-7378) Email: techsupport@lewmar.com Email: customerservice@lci1.com The contents of this manual are proprietary and copyright protected by Lippert. Lippert prohibits the copying or dissemination of portions of this manual unless prior written consent from an authorized Lippert representative has been provided.
Need help?
Do you have a question about the Lewmar 2024028464 and is the answer not in the manual?
Questions and answers