Strong 4G+ROUTER1200 User Manual

4g+ lte router

Hide thumbs

page of 84

/ 84
Bookmarks

Quick Links

Download this manual

LTE ROUTER

ROUTER1200

Need help?

Do you have a question about the 4G+ROUTER1200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Strong 4G+ROUTER1200

Page 1 LTE ROUTER ROUTER1200...
Page 2 3.1. Device Control ------------------------------------------------------------------------------------ 43 V. Wireless Settings ------------------------------------------------------------------------------------------- 44 1. Wi-Fi Settings ------------------------------------------------------------------------------------------- 44 1.1. 2.4 GHz Wi-Fi -------------------------------------------------------------------------------------- 44 1.2. 5 GHz Wi-Fi ---------------------------------------------------------------------------------------- 44 2. Guest Wi-Fi ----------------------------------------------------------------------------------------------- 44 Copyright © STRONG 2024. All Rights Reserved. 2 / 84...
Page 3 6. Reset and Backup -------------------------------------------------------------------------------------- 75 6.1. Reset ------------------------------------------------------------------------------------------------ 75 6.2. Backup --------------------------------------------------------------------------------------------- 77 7. LED Control ---------------------------------------------------------------------------------------------- 79 8. Network Diagnosis ------------------------------------------------------------------------------------ 80 8.1. Ping -------------------------------------------------------------------------------------------------- 80 8.2. Trace ------------------------------------------------------------------------------------------------- 82 Copyright © STRONG 2024. All Rights Reserved. 3 / 84...
Page 5 The Web UI is accessible after connecting to the Wi-Fi of the device or to the internet connection of the router by using the Ethernet cable and entering the following IP Address in your browser: Copyright © STRONG 2024. All Rights Reserved. 5 / 84...
Page 6 If your SIM card is micro or nano, please place the SIM card in the adapter provided in the package. To place your SIM card in the dedicated slot: follow the procedure below:  Case 1: Micro SIM Card Copyright © STRONG 2024. All Rights Reserved. 6 / 84...
Page 7 2. Placing the antennas After installing your SIM card, you must remove the cover located on the top rear side of your device to place the two external antennas as follows: Copyright © STRONG 2024. All Rights Reserved. 7 / 84...
Page 9 After that, you must insert the power cable in the power hole (A) and plug it into the outlet (B). Then press the Power button (C). After a few seconds, the LEDs located on the front side of the device are lit if the sim card is unlocked. Copyright © STRONG 2024. All Rights Reserved. 9 / 84...
Page 10 In this case, you will need to connect to the Web UI of the device to unlock it. You can either access the Web UI after connecting your computer to the router with the RJ45 cable or to the Wi-Fi of the router after typing this IP Address: 192.168.188.1. Copyright © STRONG 2024. All Rights Reserved. 10 / 84...
Page 12 To connect to the Wi-Fi, look at the rear side of your router and locate the sticker where the SSID and Password are written. Then, enter the information in your device. Then enter the following IP address in your browser: 192.168.188.1 Copyright © STRONG 2024. All Rights Reserved. 12 / 84...
Page 13 For more information about the process to change your password, please refer to Changing the administrator password in the Web UI. Once you are connected to the Web UI, you will see the home page: Copyright © STRONG 2024. All Rights Reserved. 13 / 84...
Page 15 Old Password: Enter the current password that you used to connect to the Web UI.  New Password: Enter a new password to connect to the Web UI.  Confirmed Password: Enter the same password as in the New Password field. Copyright © STRONG 2024. All Rights Reserved. 15 / 84...
Page 16 When you are connected to the Web UI for the first time, you will see a warning message that invite you to enter the PIN code by clicking the connection button. Copyright © STRONG 2024. All Rights Reserved. 16 / 84...
Page 17 17 / 84 Enter your PIN code in the field and click submit. The SIM card is unlocked, and its icon now turns green with the network name next to it. Copyright © STRONG 2024. All Rights Reserved. 17 / 84...
Page 19 To do so, you must connect to the Web UI by using an Ethernet cable by following this procedure. Click Wireless and select Wi-Fi Settings.  Case 1: deactivating both networks Then, click the Enable Wi-Fi toggle to deactivate both networks. Copyright © STRONG 2024. All Rights Reserved. 19 / 84...
Page 23 Connecting to the Wi-Fi and Accessing the Web UI.  Connecting your Device with an Ethernet Cable and Accessing the Web UI Click Network and then APN. Check the following information: Name Username Password Authentication Type Copyright © STRONG 2024. All Rights Reserved. 23 / 84...
Page 24 Enter the name of your service provider in the Profile Name (Limited to 14 characters including spaces). Then enter the APN address in the APN field. In the PDP Type field, select the APN Type: IPv4, IPv6 or IPv4v6.  Copyright © STRONG 2024. All Rights Reserved. 24 / 84...
Page 25 Wi-Fi network of the router. Once it is activated, the horizontal arrows will blink in blue. Go to the Wi-Fi settings of your computer and click on the name of the router to select it. Copyright © STRONG 2024. All Rights Reserved. 25 / 84...
Page 26 To do so, insert a paper clip in the hole to press the reset button. Press the reset button for 10 seconds. The LEDs will switch off and turn back on again. Copyright © STRONG 2024. All Rights Reserved. 26 / 84...
Page 27 Connecting to the Wi-Fi and Accessing the Web Then, click Administration and Reset and Backup. Then, click Reset and Restore Factory configuration locally. Click Confirm on the pop-up message that appears. Copyright © STRONG 2024. All Rights Reserved. 27 / 84...
Page 28 It is not possible to deactivate your PIN code in the Web UI. 2. Changing the PIN code It is not possible to change your PIN code in the Web UI. Copyright © STRONG 2024. All Rights Reserved. 28 / 84...
Page 29 Change the name entered in the Wi-Fi Name field and click the eye icon next to the Wi-Fi Password field. Then change the password entered in the Wi-Fi Password field and click Submit to save the changes. Copyright © STRONG 2024. All Rights Reserved. 29 / 84...
Page 31 Connecting to the Wi-Fi and Accessing the Web UI Click Administration and select Online Upgrade. In Advanced Settings, click Check for updates and the Enable toggle button. Then, click Submit. Copyright © STRONG 2024. All Rights Reserved. 31 / 84...
Page 32 A message appears to tell you if there is a new version available. If there is a new version available, click Yes. Then wait for the router to complete the update. The LEDs will turn off and turn back on. Copyright © STRONG 2024. All Rights Reserved. 32 / 84...
Page 33 1.1. Mobile Network The basic settings that you can configure in the Network settings are divided into three categories: Mobile Network, LAN, and Terminal Device. Copyright © STRONG 2024. All Rights Reserved. 33 / 84...
Page 34 The first section that you can see in the Internet Settings page is called Connection. You can see the preferred mobile network, PIN Code and if mobile data and data roaming and 3 party antennas are activated. Copyright © STRONG 2024. All Rights Reserved. 34 / 84...
Page 35 Select WAN port uplink and click the WAN/LAN port Adaptive toggle. Then, click Submit. 1.4. WAN You can disable the static DNS for your WAN, if necessary Click Network and WAN Copyright © STRONG 2024. All Rights Reserved. 35 / 84...
Page 37 This section of the user interface helps you to set up your LAN with two possible configurations IPv4 and Ipv6. 2.1. IPv4 Configuration You can disable the DHCP Service of your IPV4 configuration Click Network, LAN and IPv4 Configuration. Copyright © STRONG 2024. All Rights Reserved. 37 / 84...
Page 40 Click Network, LAN and IPv6 configuration Click the Enable DHCP toggle button, enter the start and end IP Addresses for the DHCP (IP Address between 192.168.1.2 to 192.168.1.99 to prevent conflicts). Then, click Confirm. Copyright © STRONG 2024. All Rights Reserved. 40 / 84...
Page 42 Connecting to the Wi-Fi and Accessing the Web UI  Click Network and LAN. Click Static IP and enter the IP address and MAC address of your device before clicking Add. Copyright © STRONG 2024. All Rights Reserved. 42 / 84...
Page 43 In this part of the Web UI, you can set up the speed limits of the router Internet Connection. 3.1. Device Control Click Network and Terminal Device. In the Device control section, enter the maximum speed limits for upload and download and click confirm. Copyright © STRONG 2024. All Rights Reserved. 43 / 84...
Page 44 If you do not want your guest to use your main Wi-Fi network for security reasons, you can easily set up a guest Wi-Fi network. 1. Click Wireless and Guest Wi-Fi 2. Configure the Wi-Fi Name and password. Enter a work time in minutes before clicking submit. Copyright © STRONG 2024. All Rights Reserved. 44 / 84...
Page 46 If you want to control the amount of time your Wi-Fi is on you can set up a Wi-Fi timer to configure the hours when the Wi-Fi should switch on or switch off. Click Wireless and Wi-Fi Timer. Copyright © STRONG 2024. All Rights Reserved. 46 / 84...
Page 47 Fi and enter the time on which the device should switch off/on. Choose between enable or disable Wi-Fi and click Add. We advise you to create a specific rule for each case this way you ensure that your device Wi-Fi will turn back on. Copyright © STRONG 2024. All Rights Reserved. 47 / 84...
Page 48 Click the Enable wireless access device control toggle button. Then, choose discard or permit according to your needs and click Add. Enter the device name and its MAC Address and click Confirm. Copyright © STRONG 2024. All Rights Reserved. 48 / 84...
Page 49 WPS PIN code is a different PIN code that is only used to connect devices of your home to the Wi-Fi network of the 4G Router 300V2. Once, you connected your devices by using one of the WPS methods mentioned above, they will automatically connect to the network. Copyright © STRONG 2024. All Rights Reserved. 49 / 84...
Page 50 The following section explains how to deactivate the WPS connection of your router. To deactivate the WPS option, click Wireless and WPS. Click the Enable WPS toggle button and click Submit. Copyright © STRONG 2024. All Rights Reserved. 50 / 84...
Page 51 You can change the Firewall security level to prevent hacking. Click Security and Firewall. Select a value in the list before clicking Submit. We recommend setting the firewall on Middle or High to prevent hacking. Copyright © STRONG 2024. All Rights Reserved. 51 / 84...
Page 52 MAC Addresses of their devices. Click Security and Parental Control. Click the Enable Parental control toggle button. Click List Add and it will automatically add the connected devices to your list. Copyright © STRONG 2024. All Rights Reserved. 52 / 84...
Page 53 Then check the Operate box and click Confirm Select the days on which Internet use is allowed and enter the time for which the Internet is allowed and click effective immediately. Copyright © STRONG 2024. All Rights Reserved. 53 / 84...
Page 54 Click Security and URL Filter. Click the Enable URL Filtering toggle button. Then select the mode and enter the URL Address and click Add. Copyright © STRONG 2024. All Rights Reserved. 54 / 84...
Page 55 Write down the MAC addresses before entering them into the Web UI. This way you will be able to use your computer in Wi-Fi or by plugging an ethernet cable. Copyright © STRONG 2024. All Rights Reserved. 55 / 84...
Page 56 4G+ROUTER1200 - User Guide 56 / 84 Click Security and Mac Filter. Click Enable MAC Filtering. Then, select the mode and enter the device name as well as the Copyright © STRONG 2024. All Rights Reserved. 56 / 84...
Page 58 Click the Enable WAN to LAN side IP Filtering toggle button and select the mode. Then, click the Enable IP Filtering from LAN to WAN toggle button and select the mode. 5.2. WAN to LAN Click Security and IP Filter. Then click, WAN to LAN. Copyright © STRONG 2024. All Rights Reserved. 58 / 84...
Page 60 5.3. LAN to WAN Click Security and IP Filter. Then click, LAN to WAN. Click the Enable IP Filtering from LAN to WAN toggle button, fill in the fields and click Add. Copyright © STRONG 2024. All Rights Reserved. 60 / 84...
Page 61 Check the enable box, select the ingress type in the list. Then enter, the start and end IP Address. Once this is done, choose the mode between discard or allow and the type of service in the list and click ADD. Copyright © STRONG 2024. All Rights Reserved. 61 / 84...
Page 62 To configure your DDNS, please follow one of the procedures below to access the Web UI:  Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Click Application and DDNS. Copyright © STRONG 2024. All Rights Reserved. 62 / 84...
Page 63 A Demilitarized Zone (DMZ) is a subnetwork that is separated and isolated from the main local network (LAN) and from Internet by a Firewall. On this network, you can configure the devices that needed to access the Internet without accessing your LAN. Copyright © STRONG 2024. All Rights Reserved. 63 / 84...
Page 64 Click Application and DMZ Host. Click Enable DMZ host then enter a DMZ HOST. Click Enable MAC Mapping and enter the MAC Address of the DMZ host then, click Submit. Copyright © STRONG 2024. All Rights Reserved. 64 / 84...
Page 67 The IGMP Proxy is used when the IGMP Snooping feature is activated. To activate the IGMP Proxy, click Application and IGMP Settings. Then, select IGMP Proxy. Click the Enable IGMP Proxy toggle button and click Submit. Copyright © STRONG 2024. All Rights Reserved. 67 / 84...
Page 68 Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Click Application and UPnP. Then, click the enable UPnP toggle button and click submit. Copyright © STRONG 2024. All Rights Reserved. 68 / 84...
Page 69 You can change the default time zone in this section. It will automatically change the date and time of your router as well as is default NTP servers addresses. Click Administration and System Time. Copyright © STRONG 2024. All Rights Reserved. 69 / 84...
Page 71 71 / 84 3. Language Settings You can change the default language of the Web UI. Click Administration and Language Settings. Select the language in the liste and click Submit. Copyright © STRONG 2024. All Rights Reserved. 71 / 84...
Page 72 STRONG’s website. Once you are on the website click Support and Download. Then select Mobile BroadBand and 4G+ LTE Router | 4G+ROUTER1200. The new software versions are located under the download section of the page under the software category. Download the file if there is one. Then, connect to the Web UI and click Administration and Software Upgrade.
Page 73 Click the Enable scheduled restart toggle button. Then, select the days on which you want the rooter to restart automatically and enter the time of the restart before clicking Submit. Times must be entered with a 24h format. Copyright © STRONG 2024. All Rights Reserved. 73 / 84...
Page 75 6. Reset and Backup 6.1. Reset You can reset your rooter to its factory settings in the Web UI. Click Administration and Reset and Backup. Then, click Restore factory configuration locally. Click Confirm. Copyright © STRONG 2024. All Rights Reserved. 75 / 84...
Page 77 You can backup your configuration through the Web UI before doing an update. Click Administration and Reset and Backup. Then select Backup. Click Back up configuration file. Then, after the update, click browse to select your file and Load configuration file. Copyright © STRONG 2024. All Rights Reserved. 77 / 84...
Page 79 Your router uses different LEDs on its front side to let you know the status of your network. You can deactivate the LEDs. Click Administration and LED Control. Click the Turn off LED and Submit Copyright © STRONG 2024. All Rights Reserved. 79 / 84...
Page 80 To do so, connect to the Web UI by following one of these procedures:  Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Click Administration and Network Diagnosis. Copyright © STRONG 2024. All Rights Reserved. 80 / 84...
Page 82 Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Click Administration and Network Diagnosis. Then, select Trace Route Test. Copyright © STRONG 2024. All Rights Reserved. 82 / 84...
Page 83 Address or Host Name: Enter the IP Address  Maximum Hops: Enter the maximum hops (value between 1 and 64)  Wait Time: Enter the wait time in seconds  Protocol: Choose the protocol Copyright © STRONG 2024. All Rights Reserved. 83 / 84...

Strong 4G+ROUTER1200 User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Strong 4G+ROUTER1200

Summary of Contents for Strong 4G+ROUTER1200