Advertisement
Quick Links
SL-344H RFID Locker Lock
Setup and User Guide
Thank you for purchasing the SL-344H RFID Locker Lock. This
user guide details the different functions of this product, please
keep a copy for your records.
⚠
SL-344H Setup and User Guide
Table of Contents
1.
What's in the box
2.
General Specifications
3.
Initialization
4.
Owner Card Programming
5.
Master Card Programming
6.
User Card Programming (Fixed Mode)
7.
Lock Mode Setting (Auto/Manual)
8.
Latch Alarm Setting (On/Off)
9.
Low Battery Warning
10. Emergency Unlocking
These locks can be installed on a door with a thickness of ≥11.5
mm.
Page 1 of 7
©2024 SYNOLOCK
Advertisement
Related Manuals for SYNOLOCK SL-344H
Summary of Contents for SYNOLOCK SL-344H
- Page 1 SL-344H RFID Locker Lock Setup and User Guide Thank you for purchasing the SL-344H RFID Locker Lock. This user guide details the different functions of this product, please keep a copy for your records. Table of Contents What’s in the box...
- Page 2 1. What’s in the box Each lock is packaged in its own box that includes the follow parts: 1 x SL-344H RFID Lock Housing (Installed Inside Locker Door) 2 x Phillips wood screws to secure the housing 1 x Round Reader Module Cover Plate (Installed Outside Locker Door)
- Page 3 Changing Owner Card 1. Remove the front lock housing from the door. 2. Follow initialization procedure in section 1. 3. Program a new Owner Card as instructed above. SL-344H Setup and User Guide Page 3 of 7 ©2024 SYNOLOCK...
- Page 4 1. Scan the Master Card. A chime will sound and both LEDs will blink for 6 seconds. 2. After 6 seconds, a second chime sounds and the unit will unlock. 3. All User Cards have also been removed. SL-344H Setup and User Guide Page 4 of 7 ©2024 SYNOLOCK...
- Page 5 Unregistered Card Alarm 1. An alarm will sound after 5 attempts to open the lock with an unregistered User Card. 2. Scan a registered User Card to deactivate the alarm. SL-344H Setup and User Guide Page 5 of 7 ©2024 SYNOLOCK...
- Page 6 2. Scan the Owner Card and wait for the lights to blink. 3. Press the latch and listen for one “Beep” sound. 4. The latch alarm is now active. SL-344H Setup and User Guide Page 6 of 7 ©2024 SYNOLOCK...
- Page 7 Battery Connector 1. Attach battery to the connector. 2. Connect leads to the two contact points on the faceplate. 3. With the battery connected, scan a valid Card to open. SL-344H Setup and User Guide Page 7 of 7 ©2024 SYNOLOCK...
Need help?
Do you have a question about the SL-344H and is the answer not in the manual?
Questions and answers