Advertisement
Quick Links
Ettus USRP E300 Embedded Family Getting Started Guides
Contents
•
1 Kit Contents
1.1 E310
♦
1.2 E312
♦
1.3 E313
♦
2 Verify the Contents of Your Kit
•
3 You Will Need
•
4 Proper Care and Handling
•
5 Install and Setup the Software Tools on Your Host Computer
•
•
6 USRP E31x Device Specific Operations
♦
6.1 Powering On the Hardware
6.2 Turning the Device Off/On
♦
6.3 Autoboot
♦
6.4 Default Password
♦
7 Serial Console Connectivity
•
8 Network Connectivity
•
9 Updating the Linux File System
•
9.1 1. Updating the file system with Mender
♦
◊
9.2 2. Updating the files system by writing the disk image
♦
10 Subdevice Specification Mapping
•
10.1 E310/E312/E313
♦
◊
◊
11 Example Programs
•
•
12 Test and Verify the Operation of the USRP
•
13 Battery (E312 Only)
14 Battery Calibration Procedure
•
15 Battery Safety Information
•
15.1 Handling
♦
15.2 Charge and Discharge
♦
15.3 Storage
♦
15.4 Disposal
♦
16 Technical Support and Community Knowledge Base
•
•
17 Legal Considerations
•
18 Sales and Ordering Support
19 Terms and Conditions of Sale
•
•
E310 USRP
•
Power supply
2x SMB-to-SMA
•
adapter
1 Gigabit
•
Ethernet cable
USB2-to-microUSB
•
cable
Imaged
•
microSD card
•
Getting started
guide
•
E312 USRP
•
Power supply
2x SMB-to-SMA
•
adapter
1 Gigabit
•
Ethernet cable
USB2-to-microUSB
•
cable
•
Imaged
microSD card
Getting started
•
guide
9.1.1 Mender Update Process
⋅
9.1.1.1 Troubleshooting Mender Update
10.1.1 UHD <3.15.x.x
10.1.2 UHD 3.15.x.x+
Advertisement
Related Manuals for ettus USRP E3 Series
Summary of Contents for ettus USRP E3 Series
- Page 1 Ettus USRP E300 Embedded Family Getting Started Guides Contents • 1 Kit Contents 1.1 E310 ♦ 1.2 E312 ♦ 1.3 E313 ♦ 2 Verify the Contents of Your Kit • 3 You Will Need • 4 Proper Care and Handling •...
- Page 2 The USRP E313 is a fully assembled device that includes an USRP E310. Make sure that your kit contains all the items listed above. If any items are missing, please contact your sales agent or Ettus Research Technical support immediately.
- Page 3 The USRP E31x can be configured to power on and boot automatically when power is applied. If the firmware is older than 2.0 then it will probably need to be updated for autoboot to work reliably; email support@ettus.com for more information.
-
Page 4: Example Output
"sg#" is the correct file type as found above, with "#" being either 1 or 3. Example Output: $ sudo uhd_images_downloader -t mender -t e310 -t sg3 --yes [INFO] Using base URL: https://files.ettus.com/binaries/cache/ [INFO] Images destination: /usr/local/share/uhd/images 292014 kB / 292014 kB (100%) e3xx_e310_sg3_mender_default-v4.0.0.0.zip [INFO] Images download complete. - Page 5 TRX-B / RX2-B = A:1 Additional details of UHD Subdevice Specifications can be found here in the UHD Manual: http://files.ettus.com/manual/page_configuration.html#config_subdev The UHD driver includes several example programs, which may serve as test programs or the basis for your application program. These example programs are already installed on the E31x device, and the source code can be obtained from the UHD repository on GitHub at: https://github.com/EttusResearch/uhd/tree/master/host/examples...
- Page 6 Technical support for USRP hardware is available through email only. If the product arrived in a non−functional state or you require technical assistance, please contact support@ettus.com. Please allow 24 to 48 hours for response by email, depending on holidays and weekends, although we are often...
- Page 7 • If you have any non−-technical questions related to your order, then please contact us by email at orders@ettus.com?, or by phone at +1−408−610−6399 (Monday-Friday, 8 AM - 5 PM, Pacific Time). Please be sure to include your order number and the serial number of your USRP.
Need help?
Do you have a question about the USRP E3 Series and is the answer not in the manual?
Questions and answers