Advertisement
Quick Links
Contents
•
1 Kit Contents
1.1 E310
♦
1.2 E312
♦
2 Verify the Contents of Your Kit
•
3 You Will Need
•
4 Proper Care and Handling
•
5 Install and Setup the Software Tools on Your Host Computer
•
6 Powering On the Hardware
•
•
7 Turning the Device Off/On
•
8 Serial Console Connectivity
9 Network Connectivity
•
10 Logging In
•
11 Example Programs
•
12 Test and Verify the Operation of the USRP
•
13 Battery (E312 Only)
•
14 Battery Calibration Procedure
•
15 Battery Safety Information
•
♦
15.1 Handling
♦
15.2 Charge and Discharge
15.3 Storage
♦
15.4 Disposal
♦
16 Technical Support and Community Knowledge Base
•
17 Legal Considerations
•
18 Sales and Ordering Support
•
19 Terms and Conditions of Sale
•
E310 USRP
•
Power supply
•
2x SMB-to-SMA
•
adapter
•
1 Gigabit
Ethernet cable
USB2-to-microUSB
•
cable
Imaged
•
microSD card
Getting started
•
guide
E312 USRP
•
Power supply
•
2x SMB-to-SMA
•
adapter
•
1 Gigabit
Ethernet cable
USB2-to-microUSB
•
cable
Imaged
•
microSD card
Getting started
•
guide
Make sure that your kit contains all the items listed above. If any items are missing, please contact your sales agent or Ettus Research Technical
support immediately.
E312 Getting Started Guides
Advertisement
Related Manuals for ettus E310 USRP
Summary of Contents for ettus E310 USRP
- Page 1 Ethernet cable USB2-to-microUSB • cable Imaged • microSD card Getting started • guide Make sure that your kit contains all the items listed above. If any items are missing, please contact your sales agent or Ettus Research Technical support immediately.
- Page 2 • All Ettus Research products are individually tested before shipment. The USRP? is guaranteed to be functional at the time it is received by the customer. Improper use or handling of the USRP? can easily cause the device to become non-functional. Listed below are some examples of actions which can prevent damage to the unit: Never allow metal objects to touch the circuit board while powered.
- Page 3 Then, plug in the USRP E312 to and AC power source and fully charge the battery. If error codes persist after cooling down and/or recharging the USRP E312 , please contact support@ettus.com In order for the battery gauge to give a usable indication of remaining charge it needs to be calibrated.
- Page 4 Technical support for USRP hardware is available through email only. If the product arrived in a non−functional state or you require technical assistance, please contact support@ettus.com. Please allow 24 to 48 hours for response by email, depending on holidays and weekends, although we are often able to reply more quickly than that.
Need help?
Do you have a question about the E310 USRP and is the answer not in the manual?
Questions and answers