Summary of Contents for DW Blackjack DX DW-BJDX31 T/LX Series
Page 1
3. Click ‘Search’. All supported materials, including manuals, Quick start guides (QSG), software and firmware will appear in the results. Attention: This document is intended to serve as a quick reference for initial setup. See the DW Spectrum® full manual for more information on features and functionality. Tel: +1 (866) 446-3595 / (813) 888-9555 digital-watchdog.com...
Page 2
Network port PS/2 keyboard/mouse port Line in True HD video output Line out D-Sub video output Mic in Default Login Information for DW Spectrum® IPVMS Default login information for the server’s OS Username: admin Password: admin12345 Username: dwuser Password: Dw5pectrum...
1x true HD, 1x DVI-D, 1x D-Sub for system configuration. Maximum 1 display output at a time. Video card Onboard Intel HD Graphics Resolution True HD: 4096x2160@60Hz , DVI-D: 1920x1200@60Hz, D-Sub: 1920x1200@60Hz Pre-loaded VMS software DW Spectrum® IPVMS Server Keyboard and mouse Included Rail kit Power supply 300W** 300W** Operating temperature and humidity 41°F~104°F (5°C~40°C), 20~90% RH...
Page 4
1. Double click Date and Time icon on the Desktop. 2. Change Time zone if not correct (default is UTC-08:00 Pacific Time) STEP 2: Configure Date and Time Windows STEP 2: Configure date and time STEP 2: Configure Date and Time Windows®...
Page 5
Quick Start Guide Linux® 1. Open Settings. 2. Click Details. 3. Click Date &Time. 4. Turn OFF Automatic Date & Time and Automatic Time Zone. 5. Click Date & Time and set correct date and time. 6. Click Time Zone and set to correct Time zone. (Type one of the largest cities in the time zone). 7.
STEP 3: Configure network Please have the following information ready before starting the network configuration. Camera network Local network (LAN) IP address Subnet mask / Netmask Default gateway / Gateway Not applicable DNS servers Not applicable * The camera network and local network cannot be on the same network. NOTE The Blackjack®...
Quick Start Guide Local Network 7. Right-click on the other Ethernet, the one with network cable unplugged, and click “Properties”. 8. Select “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties”. 6. Click OK to close then click Close to go back to Network Connections. Local Network 7.
Page 8
Linux® 1. Open Settings > Network 2. Click Setting of the Realtek Ethernet. 3. Change to Manual then enter Address, Netmask , Gateway. * Do not enter Gateway information if there is no Gateway in this network. 4. Click Apply to save. 5.
Page 9
LINUX-BASED SOFTWARE MANUAL LAUNCH ® To launch the DW Spectrum Software on the Linux-Based Cube: Refer to the camera’s QSG to configure any DW® IP camera’s IP address using DW® IP finder™. Linux OS OPTION 1: Double-click the DW Spectrum ®...
STEP 3: To check for updates Click on the menu then click “System Administration”. 2. Go to the updates tab. If the system requires updating, click on the update system button. * If you are on the latest version, it will say “You have the latest version installed”...
Page 11
* It is strongly recommended to create a Database Backup to external storage media before and after every update in the event that a system restore point is needed. NOTE: More information and instructions are available in the DW Spectrum® IPVMS user manual.
5. Make sure that the camera is connected to the same network as the server. disconnected 6. If you are connecting to a camera that is integrated with DW Spectrum via the ONVIF protocol (see list), make sure ONVIF is enabled.
Need help?
Do you have a question about the Blackjack DX DW-BJDX31 T/LX Series and is the answer not in the manual?
Questions and answers