Summary of Contents for DW BlackJack Ai DW-BJAiDX24T
Page 1
3. Click ‘Search’. All supported materials, including manuals, Quick start guides (QSG), software and firmware will appear in the results. Attention: This document is intended to serve as a quick reference for initial setup. See the DW Spectrum® full manual for more information on features and functionality. Tel: +1 (866) 446-3595 / (813) 888-9555 digital-watchdog.com...
USB 2.0 Ports Mini Displayport USB 2.0 Port BIOS Flashback Button 1G LAN RJ45 Port 2.5G LAN RJ45 Port Default login information for DW Spectrum® IPVMS Default Login Information for the server’s OS Username: admin Password: admin12345 Username: dwuser Password: Dw5pectrum...
3. Turn on the server if the server does not turn on automatically. (Press the Power Button on the front of the P-RACK. F2 on the diagram). SETTING UP THE E-RACK * Connecting the power cable to the live power source may turn on the server automatically Quick Start Guide STEP 1: Connect Peripherals, power and network...
Page 4
STEP 3: Configure network Please have the following information ready before starting the network configuration. Camera network Local network (LAN) IP address Subnet mask / Netmask Default gateway / Gateway Not applicable DNS servers Not applicable * Camera network and local network cannot be on the same network. NOTE The Blackjack®...
Page 5
Quick Start Guide Select “Use the following IP address” (Use the following DNS server addresses will be selected automatically). Enter the IP address and Subnet mask of the camera network. (Do not enter anything for the default gateway, preferred DNS server and alternate DNS server.) NOTE It must be the same network as the cameras and must not be the same network as the local network.
Page 6
Password: admin12345 STEP 1: Initial run from the Blackjack server ® Open the DW Spectrum client by double-clicking on the DW Spectrum icon. ® ® Click on the pre-configured server. Enter the password and click Connect. Default password: admin12345 (case sensitive).
Page 7
Quick Start Guide STEP 3: To check for updates Click on the menu then click “System Administration”. 2. Go to the updates tab. If the system requires updating, click on the update system button. * If you are using the latest version, it will say, “You have the latest version installed,” and the Update System button will be disabled. Click OK when the update is completed.
Page 8
STEP 4: Enter and activate licenses Go to the system administration window and click on the license tab. Enter the license key and click “Activate License.” An Internet connection is required. Click on “Activate Trial License” if you have not purchased a valid license key.
Page 9
Quick Start Guide 3. Click to turn on recording. 4. Configure the camera’s schedule settings for quality, FPS and recording type. 5. Click and drag the mouse over the recording schedule to apply the settings to multiple days and times. Click “All”...
Page 10
3. Navigate to the folder you want to save the database and enter a name for the backup file. Click save. * It is strongly recommended that you back up your data to an external storage media as well. NOTE: More information and instructions are available in the DW Spectrum IPVMS user manual.
Page 11
Logging in with the DW Ai Server Configuration Tool While some camera settings can be configured through the DW Spectrum IPVMS Client, the DW Ai Server Configuration Tool can be used to provide a complete analytic user experience during the configuration process of the DW Ai Server.
Page 12
Once you are logged in and connected to the DW Ai Server through the DW Ai Server Configuration Tool, a list will show all added cameras in the left-side panel. To view all cameras including the cameras without DW Ai server plugin enabled, click “Ai” to view all cameras.
Page 13
New Licenses In the New Licenses area of the menu, server tabs (Server #) are created for each DW Ai Server. Select a server tab to view the license activation interface. • Type Specifies the activation method that will be used for your license activation request.
Page 14
Manual Activation: Select to copy the server’s HW GUID and manually add a DW Ai license. This option is intended for use if the DW Ai Server does not have access to the Internet. • HWGUID: This is the system’s unique code. Copy the HWGUID and submit a request for a manual activation code to licenses@digital-watchdog.com.
Page 15
Enable Tab – DW Ai Server Plugin To set up analytics on the DW Ai Server, select a camera from the left-side panel. The Enable tab shows the status of the plug-in for the selected camera. From here, you can check your license status and select the preferred deep-learning feature.
• Windows Server 2022 – Released: August 2021 | EoS: 10/2031 **NOTE: DW Spectrum IPVMS for Windows can be installed as a software bundle, or the Server and Client software can be installed separately. Ubuntu (Debian-based Linux) OS (supported by both DW Spectrum Server and Client).
Need help?
Do you have a question about the BlackJack Ai DW-BJAiDX24T and is the answer not in the manual?
Questions and answers