Page 1
Refrigerator User Manual KWD2330X KWD253PX...
Page 2
Please read this manual first! Dear Customer, We hope that your product, which has been produced in modern plants and checked under the most meticulous quality control procedures, will provide you with effective service. For this, we recommend you to carefully read the entire manual of your product before using it and keep it at hand for future references.
Page 3
1. Safety and environment instructions 3 5 Operating the product 5.1. Indicator panel....16 2 Your refrigerator 5.2. NeoFrost Cooling System ...19 5.3.
Page 4
Safety and environment instructions This section provides the safety After unplugging, wait at least 5 • instructions necessary to prevent the risk minutes before plugging in again. of injury and material damage. Failure to Unplug the product when not in use. •...
Page 5
Important instructions for safety and environment qualified electrician. 1.1.1 HC warning If the product has LED type lighting, • If the product comprises a cooling system contact the authorised service for using R600a gas, take care to avoid replacing or in case of any problem. damaging the cooling system and its pipe Do not touch frozen food with wet •...
Page 6
Important instructions for safety and environment 1.3. Child safety • Keep packaging materials out of children’s reach. • Do not allow the children to play with the product. • If the product’s door comprises a lock, break off the lock when eventually disposing of the product.
Page 7
Your refrigerator Congratulations on your choice of a BLOMBERG quality Appliance which has been designed to give you service for many years. 1- Freezer compartment 9- Odour filter 2- Fridge compartment 10- Chiller compartment 3- Fan 11- Crisper compartment 4- Butter-cheese compartments...
Page 8
Installation 3.1. Appropriate Always have the repair procedures carried out by the Authorised Service Agent. Manufacturer shall installation location not be held liable for damages that may arise from WARNING: If the door of the room procedures carried out by unauthorised persons. where the product will be placed is too To make the product ready for use, make sure small for the product to pass, then the...
Page 9
Installation WARNING: If the product has a failure, it should not be operated unless it is repaired by the Authorised Service Agent! There is the risk of electric shock! 3.4. Adjusting the feet If the product stands unbalanced after installation adjust the feet.
Page 10
Installation adjusting nut fixing nut fixing nut 1. Union for connecting the water hose to the rear of the refrigerator 2. 3 pieces of pipe clips (used to secure the water hose) adjusting nut 3. 5-meter long water hose (1/4 inch in diameter) 3.5.
Page 11
Installation 3.8. Connecting the water hose to the refrigerator 1. Slip the union (b) onto the water hose (a). 2. Push the water hose downwards firmly to slip it onto the water inlet valve (c). 3. Tighten the union (c) by hand to secure it onto the water inlet valve.
Page 12
Installation WARNING: WARNING: After turning on the Water filter must be water valve, make sure that there is no held upright as shown in the figure. It leakage at both connection points of the is critical to connect the water inlet and water hose.
Page 13
Installation 3.12. Activating water filter change warning (For products connected to the mains water line and equipped with filter) Water filter change warning is activated as follows: Automatic filter usage time calculation is not enabled ex factory. It must be enabled in products equipped with a filter. The S4 display board we use in the refrigerator has a nine-key system.
Page 14
Installation 3.13. Before starting to use • If the water dispenser is not used for a long the water/ice dispenser period of time, first 1-2 glasses of water can be not so cold. (This feature is optional) • If a power outage or a temporary failure occurs • If the water pressure is below 1 bar then a while the refrigerator is operating, ice can melt separate pump may need to be used.
Page 15
Preparation 4.1. Things to be done 4.3. Recommendations on for energy saving the fridge compartment • Do not allow the food to touch the Connecting the product to electric energy saving systems is risky as it may restrict temperature sensor in fridge compartment. operation of the product.
Page 16
Preparation You will hear a noise when the compressor starts up. The liquids and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running and this is quite normal. Front edges of the refrigerator may feel warm.
Page 17
Operating the product 5.1. Indicator panel Indicator panels may vary according to the product model. *opsiyonel 11.2 11.1 1. Freezer compartment temperature setting 2. Economy mode 3. Energy saving function (display off) 4. Power failure/High temperature / error warning indicator 5.
Page 18
Operating the product 6. Rapid cooling 1. Freezer compartment temperature setting For rapid cooling , press the button; this will Pressing the button ( ) will enable the freezer activate the rapid cooling indicator ( compartment temperature to be set at -18,-19,- Press this button again to deactivate this function.
Page 19
Operating the product 11.2 Alarm off warning In case of power failure/high temperature alarm, after checking the food located in the freezer compartment press the alarm off button to clear the warning. 12. Autoeco Press the auto eco button ( ), for 3 seconds to activate this function.
Page 20
Operating the product 5.2. NeoFrost Cooling System • Materials to be used for packaging must be tear-proof and resistant to cold, humidity, Thanks to the two separate cooling systems, oils and acids and they must also be airtight. cooling speed is much faster than traditional Moreover, they must be made from easy-to-use refrigerators.
Page 21
Operating the product 5.4. Recommendations for Pack the food in an airtight manner to preserving the frozen food prevent them from drying even if they are going to be stored for a short time. • Frozen food that you have purchased should be stored in accordance with the frozen food •...
Page 22
Operating the product 5.7. Chiller compartment 5.11. Odour filter *optional *optional The chiller compartment maintains a lower Odour filter prevents unpleasant odour build-up in temperature then the rest of the fridge, ideal for your refrigerator. storing fresh meat fish and deli items. Odour filter can be located in the fridge You can increase the inner volume of your compartment on the back wall.Pull the cover into...
Page 23
Operating the product 5.12. Using the dispenser As the level of the water in your glass/container rises, slightly lessen the pressure on the lever to *optional prevent the overspill. If you slightly press the lever, The water and ice dispenser will provide chilled the water will drip;...
Page 24
Operating the product 5.13. Filling the water 5.14. Humidity controlled crisper dispenser’s tank (FreSHelf) Water tank filling reservoir is located inside the (This feature is optional) door rack. Open the reservoir cover and pour in Humidity rates of the vegetables and fruit are kept clean drinking water.
Page 25
Operating the product 5.15. Filling the water • Grab the water tank from both sides and remove dispenser’s tank it with an angle of 45°. • Clean the water tank by removing its lid. Water tank filling reservoir is located inside the door rack.
Page 26
Operating the product 5.18. Icematic and ice 5.19. Ice-maker storage container (Optional) *optional Ice maker is located on the upper section of the freezer cover. Using the Icematic’ Hold the handles on the sides of the ice stock Fill the Icematic with water and place it into its reservoir and move up to remove.
Page 27
Operating the product When the ice dispenser does not work properly Do not dismount the ice stock reservoir unless it is necessary. If you do not remove ice cubes for a long time, they will cause formation of ice chunks. In this case, please remove the ice stock reservoir in accordance with the instructions given above, seperate the ice chunks, discard the inseparable ice and put the ice cubes back...
Page 28
Maintenance and cleaning Therefore, clean the refrigerator with bi- Cleaning your fridge at regular intervals will carbonate dissolved in water every few months. extend the service life of the product. Never use detergents or soap. WARNING: • Keep the food in closed containers. Unplug the product before Microorganisms spreading out from uncovered cleaning it.
Page 29
Maintenance and cleaning Remove the glass water tank cover by pressing both sides. Remove the hose connecting cover. Remove the glass water tank with its case by holding it from both sides and remove it with an angle of 45°C. Clean the glass water tank by removing its case.
Page 30
Troubleshooting Check this list before contacting the service. Doing so will save you time and money. This list includes frequent complaints that are not related to faulty workmanship or materials. Certain features mentioned herein may not apply to your product. The refrigerator is not working.
Page 31
Troubleshooting The freezer temperature is very low, but the cooler temperature is adequate. • The freezer compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again. The cooler temperature is very low, but the freezer temperature is adequate. • The cooler compartment temperature is set to a very low degree.
Page 32
Troubleshooting • The product is not cleaned regularly. >>> Clean the interior regularly using sponge, warm water and carbonated water. • Certain holders and packaging materials may cause odour. >>> Use holders and packaging materials without free of odour. • The foods were placed in unsealed holders. >>> Keep the foods in sealed holders. Micro-organisms may spread out of unsealed food items and cause malodour. Remove any expired or spoilt foods from the product. The door is not closing. • Food packages may be blocking the door. >>> Relocate any items blocking the doors. • The product is not standing in full upright position on the ground. >>> Adjust the stands to balance the product.
Page 33
• Repairs necessary as a direct or indirect result of: Accidental damage, misuse or abuse of a product. An attempted repair of a product by anyone other than a Blomberg Approved Engineer (the “Engineer”). Installation or use of a product where such installation or use fails to meet the requirements contained in this guarantee or the User Instructions Booklet.
Page 34
11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only. Does Blomberg offer replacements? This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new product instead of carrying out a repair.
Page 35
2 years, you will automatically activate the Optima Inverter Motor 10 year guarantee. You do not need to register twice. To make a claim against your Blomberg Optima Inverter Motor Guarantee (the “Guarantee”), all customer and product details must be registered with Beko plc using the procedure outlined below.
Page 36
5. Any repair/replacement of the Optima Inverter motor must only be carried out by an authorised Blomberg Service Agent (the “Service Agent”). 6. Labour for the repair/replacement of the Optima Inverter motor is not included in this guarantee and is chargeable directly by the Service Agent 7.
Page 37
Model number Serial number Purchased from Date of purchase For service under guarantee or for product advice please call our Contact centre Before requesting service please check the troubleshooting guide in the Operating Instructions booklet, as a charge may be levied where no fault is found, and even though your product may still be under guarantee.
Page 38
Contact us though our website Send us a secure message through our online contact us form. Please visit our website, click Contact Us and choose a product support topic from the list of options. Complete the required details and click send message.
Need help?
Do you have a question about the KWD253PX and is the answer not in the manual?
Questions and answers