INTRODUCTION The hilmor Lineset Cleaner is a system that easily cleans the inside of a lineset in a few minutes! Just pick a nozzle that fits the lineset, insert a foam pig, connect pressure from a nitrogen tank, and launch a foam pig into the line.
KEY FEATURES PICTURE-PERFECT CLEANING • Simply connect the correct nozzle, chamber the corresponding pig size, connect to a regulated compressed Nitrogen source, and pull the trigger for a perfectly clean lineset. TWICE THE VERSATILITY • One tool that has the ability to effectively wipe contaminants and remaining oil from linesets ranging from 3/8"...
Failure to do so could result in injury. 3. Insert no more than one cleaning pig at a time prior to pressurizing the hilmor Lineset Cleaner. 4. Make sure that launcher cover is closed and secure prior to applying pressure to the trigger.
Need help?
Do you have a question about the Lineset Cleaner and is the answer not in the manual?
Questions and answers