SUPPLY CORD HOUSING
• This appliance has a supply cord housing (H) situated on
its underside of its base.
SAFETY THERMAL PROTECTOR
• The appliance has a safety device, which protects the
appliance from overheating.
• If the appliance turns itself off and does not switch itself
on again, disconnect it from the mains supply, and wait
for approximately 15 minutes before reconnecting. If the
machine does not start again seek authorised technical
assistance.
CLEANING
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Clean the electrical equipment and the mains connection
with a damp cloth and dry. DO NOT IMMERSE IN
WATER OR ANY OTHER LIQUID.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
• Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
• Do not let water or any other liquid get into the air vents to
avoid damage to the inner parts of the appliance.
• Never immerse the appliance in water or any other liquid
or place it under running water.
• It is advisable to clean the appliance regularly and
remove any food remains.
• If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration
of the appliance's useful life and could become unsafe
to use.
• No parts of this appliance are suitable for cleaning in the
dishwasher.
• Dry all parts before its storage.
Need help?
Do you have a question about the CREPE & FUN and is the answer not in the manual?