EKT RM-L968E Instruction Manual

6 in 1 Universal Purpose Remote Controller
Model:RM-L968E
Manual Programing (A):
1- Put batteries in the control and turn on the home appliance.
2- Find out the type of your home appliance and the first code from the code table. For example: the
DVD is branded SONY, the first code is 3017.
3- Click the "SELECT" key to shift to the DVD interface.
4- Press the "SET" key for about 5 seconds, to enter the sub-menu "CODE" state.
5- Press the "OK" key, to enter the settings state.
6- Enter a four-digit code 3017.When you enter the right code, you will hear a beep,then the system will return to
the "CODE" sub-menu.Press the "EXIT" to withdraw and save the settings.Examine if other keys (except for the
"SELECT" key and the "SET" key) are working normally.Complete the effective settings. If the settings are ineffective,
then repeat the steps 5~6 (if a wrong code is entered, you will hear consecutive beeps, then you have to enter the
right code again).
Electronics Katrangi Trading
w w w . e k t . c o m
2