Answering And Ending A Call; Answering A Call During An Active Call; Muting The Microphone; Adjusting Incoming Volume - Plantronics CALISTO P210 MOC User Manual

Answering and ending a call

1
To answer a call press the green call/answer function
key.
2 To end a call press the red call end function key.

Answering a call during an active call

1
To answer an incoming call while engaged in an
active call, press the red call end function key. This will
disconnect the current call and allow the incoming call to ring.
2
You can place the first call on hold in Microsoft Office
Communicator and answer the second call either in
Microsoft Office Communicator or by pressing the green
call/answer button. You can manage/resume calls with the
hold function as usual within Microsoft Office Communicator.

Muting the microphone

1 To mute the microphone during a call, press the mute
key. An LED will indicate the microphone is muted.
2
To unmute the microphone, press the mute key again.
The LED will turn off.

Adjusting incoming volume

To increase or decrease the incoming volume, press the + or –
buttons on the side of the P210-M.

Ringer adjustment

To adjust the ringer volume or turn the ringer off, use the ringer
control switch on the side of the P210-M. In the event a call is
received and the ringer control switch is "off", the visual ringer will
indicate an incoming call.
Plantronics P210-M USB Handset User Guide
OR

Speakerphone activation

1 Press the speakerphone key. The audio functions will be
transferred to the computer speakers and microphone or
whichever device you have set as the default within Microsoft
Office Communicator.
2 Press the speakerphone key again and the audio
functions will be transferred back to the P210-M
NOTe If you would like to adjust the default device settings in
Microsoft Office Communicator, please refer to the quick help
guide at www.plantronics.com/ucassistance.

Using the monitor clip

1
Using the fastening material provided, attach the monitor clip
to your computer monitor as shown below.
2 Place the handset into the clip.
.
6