Advertisement
Quick Links
Advertisement
Related Manuals for Trotec PSIS 10-230V
Summary of Contents for Trotec PSIS 10-230V
- Page 1 PSIS 10-230V INSTRUCTIONS DIGITAL SOLDERING STATION...
- Page 2 Information marked with this symbol indicates that the the plug in any way. Do not use any adapter plugs with instructions must be observed. earthed (grounded) devices. Unmodified plugs and matching outlets will reduce risk of electric shock. digital soldering station PSIS 10-230V...
- Page 3 Keep your hair and clothing away from • Avoid touching the hot soldering tip with the plastic moving parts. Loose clothes, jewellery or long hair can be parts of the holder. Otherwise the device may be caught in moving parts. damaged. digital soldering station PSIS 10-230V...
- Page 4 Only use the holder included in the scope of delivery or another fireproof base or mat for setting down the hot Wear eye protection. soldering iron. With it you protect your eyes from splintering, falling and flying pieces which could cause injuries. digital soldering station PSIS 10-230V...
- Page 5 2. Disconnect the device from the mains in the event of an emergency: Hold onto the mains plug while pulling the power cable out of the mains socket. 3. Do not reconnect a defective device to the mains. digital soldering station PSIS 10-230V...
- Page 6 Indication of current and Indicates current and target desired temperature temperature (while settings are Storage compartment for soldering sponge being made) Soldering sponge Solder Soldering tips Soldering iron Storage compartment for soldering tips Storage compartment for solder digital soldering station PSIS 10-230V...
- Page 7 • Check the contents for completeness and look for damages. Warning Risk of suffocation! Do not leave the packaging lying around. Children may use it as a dangerous toy. • Dispose of the packaging material according to the national regulations. digital soldering station PSIS 10-230V...
- Page 8 1. Insert the mains plug into a properly secured mains joint. socket. • Make sure that the molten solder entirely covers the solder pad and surrounds the connection wire completely. digital soldering station PSIS 10-230V...
- Page 9 (18) or (19) to set the desired temperature value. ð An arrow indicates the selected temperature in the preset temperature display (20). ð The last preset temperature (default setting 300 °C) is indicated on the LC display (16) for 3 seconds. Afterwards, the display indicates the current temperature. digital soldering station PSIS 10-230V...
- Page 10 The soldering flux is either part of the soldering agent Accessories Article number or must be applied separately. Find out more about a Set of soldering tips 6.236.001.001 suitable soldering agent for your intended application. digital soldering station PSIS 10-230V...
- Page 11 • The soldering tip is soiled. Clean the soldering tip by wiping it on the moistened soldering sponge. • The soldering tip is worn out. Insert a new soldering tip to ensure the soldering station's full power. digital soldering station PSIS 10-230V...
- Page 12 • Dry the device with a soft, lint-free cloth. • Regularly clean the soldering tips by wiping them on the damp soldering sponge and by tin-coating them afterwards. • Do not use any chemicals for cleaning the soldering tips. digital soldering station PSIS 10-230V...
- Page 13 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...
Need help?
Do you have a question about the PSIS 10-230V and is the answer not in the manual?
Questions and answers