Advertisement
Quick Links
Advertisement
Related Manuals for EGO BHX1000
Summary of Contents for EGO BHX1000
- Page 1 REPAIR GUIDELINE BACKPACK HARNESS_BHX1000 Version: 1 Issue Date: 2019/02/20...
- Page 2 BHX1000 Backpack Harness 1. Remove the battery from the backpack harness. 2. Remove the strap from harness (refer to the operator’s manual). Backpack subassembly Strap...
- Page 3 BHX1000 Backpack Harness 3. Remove the Screw #1 and Screw #2 to detach the mounting plates and leaf spring from the rear housing . Mounting plate Screw #1 Screw #2 Leaf spring Description11 Part Number QTY. Description Part Number QTY.
- Page 4 BHX1000 Backpack Harness 4. Loosen and remove the 10 screws to disassemble the rear housing. Rear housing Tapping screw Description Part Number QTY. Rear housing 3322690001 Tapping screw 5610294001...
- Page 5 BHX1000 Backpack Harness 5. Loosen screw 1&2 to remove cord anchor, disconnect connectors 1&2 and remove the power cord ASSY. If power cord ASSY is broken, replace it with a new one. Note : Align the wires in the Tapping screw...
- Page 6 BHX1000 Backpack Harness 6. Loosen screws 3,4,5,6,11&12 then remove the cord anchor, which is attached with a sponge pad. Disconnect connectors 1&2 to totally separate the electric assembly from the front housing. Cord anchor Note: Align the wires in the...
- Page 7 BHX1000 Backpack Harness 7. Loosen 7,8,9&10 to remove the dust cover. Replace the broken one in the below table. Front housing Support Spring Dust Cover Power pack button #1 Power pack button #2 Description Part Number QTY. Description Part Number QTY.
- Page 8 BHX1000 Backpack Harness NOTICE: When assembling the power pack button #1 and power pack button #2 into the front housing, pre-assemble the spring onto the power pack button #1 and and then follow the steps below to locate the buttons into the groove of the housing.
- Page 9 BHX1000 Backpack Harness 8. Loosen the 4 screws to remove the bottom support. Bottom support Description Part Number QTY. Bottom support 3129071001 Tapping screw 5610294001...
- Page 10 BHX1000 Backpack Harness 9. Remove the white lever and torsion spring. Remove 8 screws and cord anchor to disassemble the ejection mechanism . If any part is broken, replace it accordingly. Cord anchor White lever Torsion spring Ejection mechanism Description Part Number QTY.
- Page 11 BHX1000 Backpack Harness 10. Assemble all parts in reverse order. Bottom support Rear housing Note: There is no specific order for assembling the bottom support and the rear housing. Finally, assemble back the strap(refer to the operator’s manual). THE END...
Need help?
Do you have a question about the BHX1000 and is the answer not in the manual?
Questions and answers