Overall Specifications; Phono Input; Dimension And Weight; Tone Controls - NAD C165BEE Owner's Manual

OVERALL SPECIFICATIONS

line level input
output

tone controlS

power conSumption

PHONO INPUT

Signal/Noise ratio, IHF A-weighted - MC

DIMENSION AND WEIGHT

legend:
1 Measured with 30 Ω generator impedance, MC input resistance set to 600 Ω.
 Measured with 10 Ω input termination.
 Measured with MM cartridge connected (600mH+ 600 Ω)
 Gross dimensions include feet, volume control and extended rear panel terminals.
Specifications are subject to change without prior notice. For updated documentation and features, please log onto www.NADelectronics.com for the latest
information about C 165BEE.
Input impedance (R and C)
Input sensitivity
Maximum input signal
Signal/Noise ratio, A-weighted
Channel Separation
Frequency response
Frequency response (subwoofer out)
Output impedance - Pre out
Tape out
Sub out
Headphones
Maximum output level - Pre out
Tape out
Sub out
Headphones
THD (CCIF IMD, DIM 100)
Treble
Bass
Normal operation
Standby mode
Input impedance - MC
MM
Input sensitivity - MC
MM
Input overload - MC
MM
Gain - MC in - Tape out
MM in - Tape out
THD (CCIF IMD, DIM 100)
MM
RIAA response accuracy
Infrasonic filter
Channel Separation - MC
MM
Dimensions (W x H x D)
Net weight
Shipping weight
100 kΩ+ 320 pF
158 mV (ref. 500 mV out)
>9 V
>108 dB (ref. 500 mV in 500 mV out, volume set to unity gain)
>106 dB (ref. 2V out, Volume maximum)
>80 dB (ref. 1 kHz/10 kHz)
± 0.1 dB (ref. 20 Hz - 20 kHz, Tone defeat ON)
± 0.5 dB (ref. 20 Hz - 20 kHz, Tone defeat OFF)
100 Hz (ref. -3 dB)
75 Ω
Source Z + 440 Ω
100 Ω
10 Ω
>10 V into 600 Ω
>10 V into 10 kΩ load
>7 V into 1 kΩ load
>5 V into 600 Ω
>2 V into 32 Ω
>0.001 % (ref. 20 Hz – 20 kHz, 2V out)
± 5 dB at 10 kHz (ref. 2V in 500 mV out)
± 5 dB at 100 Hz (ref. 2V in 500 mV out)
21 W
<0.8 W
40,100,600 Ω (R)
1 nF (C)
47 kΩ (R)
220,300,400 pF (C)
0.15 mV (ref. 1 kHz 500 mV out)
2.63 mV (ref. 1 kHz 500 mV out)
1 mV/10 mV/100 mV (20 Hz/1 kHz/20 kHz)
16 mV/147mV/1.4V (20 Hz/1 kHz/20 kHz)
59.8 dB (ref. 1 kHz, 10 kΩ load)
1
36.5 dB (ref. 1 kHz, 10 kΩ load)
<0.009 % (ref. 20 Hz – 20 kHz, 5 Vrms Tape out)
>78 dB (ref. 0.5 mV)

>86 dB  (ref. 0.5 mV)
± 0.5 dB (ref. 20 Hz – 50 Hz)
± 0.3 dB (ref. 50 Hz – 20 kHz)
10 Hz (at -3 dB)
5 Hz (at -14 dB)
>60 dB (ref. 1 kHz/10 kHz)
>60 dB (ref. 1 kHz/10 kHz)
435 x 80 x 286 mm (Net)
435 x 99 x 315 mm (Gross )

6 kg
7.8 kg
REFERENCE
SpecificationS
1