Advertisement
Quick Links
Advertisement
Related Manuals for U-Line HRI124-IS01A
Summary of Contents for U-Line HRI124-IS01A
- Page 1 QUICK START GUIDE 1 Class 115V 24” Refrigerator Ice / Refrigerator Freezer ● ● 30675 Rev_C...
- Page 2 ® to preserve the right product, in the right place, at the right temperature. Since 2014, U-Line has been part of the Middleby family of brands. All products are designed, engineered, and assembled in Milwaukee, Wisconsin, USA, and select products are available worldwide.
- Page 3 For more details, see the complete User Guide & Service Manual on u-line.com. 1 year + 1 with registration This product is eligible for an additional one-year warranty at no charge when you register your product on u-line.com. See complete warranty for details.
- Page 4 QUICK START GUIDE Safety and Warning NOTICE DANGER Please read all instructions before installing, operating, or servicing the appliance. Service must be done by factory authorized service personnel. Any parts shall be replaced Use this appliance for its intended purpose only and follow with like components.
- Page 5 QUICK START GUIDE USER GUIDE USER GUIDE u-line.com Environmental Requirements Electrical This model is intended for indoor/interior applications only WARNING and is not to be used in installations that are open/ exposed to natural elements. SHOCK HAZARD — Electrical Grounding Required.
- Page 6 The water valve uses a standard 1/4" (6.35 mm) is under pressure at all times. Plastic may crack compression fitting. U-Line recommends using accessory or rupture with age and cause damage to your water hook up kit – part # 80-54674-00. The kit includes a home.
- Page 7 USER GUIDE QUICK START GUIDE u-line.com 4. Break away filler feature in bushing with flat screwdriver. Remove with flat screwdriver 5. Thread water line through back panel hole (with bushing). 6. Locate water valve inlet and connect to valve. 7. Turn on water supply and check for leaks.
- Page 8 USER GUIDE QUICK START GUIDE USER GUIDE u-line.com Door Swing Stainless, Black, White Models Door Adjustments Wall 2-1/8" Min. HINGE COVER (54 mm) Hinge cover included with the literature bag is optional. To install hinge cover: Press hinge cover squarely over hinge.
- Page 9 QUICK START GUIDE USER GUIDE u-line.com Remove door by tilting forward and lifting door off REVERSING THE DOOR bottom hinge. Retain shoulder washers; they will be Location of the unit may make it desirable to mount the USER GUIDE reused.
- Page 10 QUICK START GUIDE USER GUIDE u-line.com USER GUIDE SAFETY • INSTALLATION & INTEGRATION • OPERAT Integrated Models Prepare door for reinstallation: Door Adjustments Remove gasket. This will reveal mounting holes for the magnet assembly. u-line.com DOOR ALIGNMENT AND ADJUSTMENT Remove magnet assembly from door with T-10 TORX Align and adjust the door if it is not level or is not sealing c.
- Page 11 QUICK START GUIDE USER GUIDE USER GUIDE Remove bottom hinge: u-line.com u-line.com 1. Remove bottom hinge from cabinet. OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE Remove door by tilting forward and lifting door off TO REVERSE THE DOOR bottom hinge. Retain shoulder washers; they will be reused.
- Page 12 QUICK START GUIDE If the unit is not level, adjust the legs on the corners of 4. Rotate door 180° to reverse. the unit as necessary. u-line.com u-line.com Install top hinge and door: Install top hinge and door: 1. Use alternate hinge supplied with unit and reinstall the Install hinge with longer straight edge aligned to screws.
- Page 13 QUICK START GUIDE Amended QUICK START GUIDE USER GUIDE USER GUIDE u-line.com SAFETY • INSTALLATION & INTEGRATION • OPERATIN Integrated Panel Installation Anti-Tip Bracket 1. Fully open door/drawer. Slide unit out so screws on top of unit are easily accessible.
- Page 14 Clamp Integrated Panel Integrated Panel using clamps. A robust tape may also 14.Remove clamps from door/drawer. be used. U-Line recommends the use of bar clamps to Door/Drawer NOTICE secure the panel to the door/drawer. If If panel requires additional adjustment after...
- Page 15 If the temperature displayed is diffe ent than selected, the unit is progressing towards the selected temperature. Time to reach set point varies based upon ambient temperature, temperature of product loaded, door openings, etc. U-Line recommends allowing the unit to reach set points before loading.
- Page 16 ⁄ ” ⁄ ” (64mm) (66 mm) specifications. When determining capacities U-Line uses typical 12 oz. cans, 12 oz. bottles, 750 mL white wine and red wine bottles shown below. ⁄ ” ⁄ ”...
- Page 17 QUICK START GUIDE USER GUIDE u-line.com (Ice maker models only) CAUTION ICE MAKER OPERATION NEVER use an ice pick, knife or other sharp When the ice bucket is full, the ice making mechanism will instrument to separate cubes. Shake the ice shut off.
- Page 18 USER GUIDE QUICK START GUIDE u-line.com ICE MAKER ADJUSTMENT 3. Turn the adjusting screw toward the minus (-) sign (clockwise) for smaller cubes or toward the plus (+) Ice Cube Thickness Adjustment sign (counterclockwise) for larger cubes. Interval - As Required 4.
- Page 19 QUICK START GUIDE USER GUIDE u-line.com Cleaning To clean integrated panels, use household cleaner per the cabinet manufacturer’s recommendation. Stainless Models Stainless door panels and handles can discolor when INTERIOR CLEANING exposed to chlorine gas, pool chemicals, saltwater or Disconnect power to the unit.
- Page 20 USER GUIDE QUICK START GUIDE u-line.com NOTICE The drain pan was not designed to capture the water created when manually defrosting. To prevent water from overflowing the drain pan and possibly damaging water sensitive flooring, the unit must be removed from cabinetry.
- Page 21 For products installed and used for normal residential use, material cosmetic defects are included in this warranty, with coverage limited to 60 days from the date of original purchase. All service provided by U-Line under the above warranty must be performed by a U-Line factory authorized servicer, unless otherwise specified by U-Line.
Need help?
Do you have a question about the HRI124-IS01A and is the answer not in the manual?
Questions and answers