How to change PCB .......................................................................................................................................................02
Main service parts codes.............................................................................................................................................03
Summary of Contents for Mitsubishi Electric SVL Series
Page 1
MITSUBISHI ELECTRIC EUROPE HEAT RECOVERY VENTILATOR (RESIDENTIAL USE) SVL-150CZPV-E, SVL-200CZPV-E Service Manual Electrical Connections …..…………………………………………………………………………………………………………………………..01 How to change PCB ……...………..…………………………………………………………………………………………………………………..02 Main service parts codes.…………………………………………………………………………………………………………………………..03 Setup settings………………………….……………………………………………………………………………………………………………………..04 Error Codes in Wireless smart multi-control …………………………………………………………………………………… 06...
Page 2
MITSUBISHI ELECTRIC EUROPE / SVL series / SERVICE MANUAL ELECTRICAL CONNECTIONS The electrical installation must correctly comply with the relevant standards. Warning! The fans and the control circuit shall operate at 230 V. If handling or maintenance work is carried out, the unit must be disconnected from the mains.
Page 3
HOW TO CHANGE PCB Warning! The unit must be disconnected from the mains. To access PCB and change it, follow the steps below: This PCB is in vertical position behind this upper polypropylene. Remove it. Power supply for fan 1 Power supply for fan 2 Power supply Reset button...
Page 4
MITSUBISHI ELECTRIC EUROPE / SVL series / SERVICE MANUAL MAIN SERVICE PARTS CODES SVL series article description Code art. Units Energy-saving fan SV-150 for extraction side 687697 Energy-saving fan SV-150 for supply side 687698 Energy-saving fan SV-200 for extraction side...
Page 5
Ref. PZ-SVL08DCT-E SETUP SETTINGS Important! To enter the installer menu and adjust the desired parameters, use the Wireless smart multi-control Designation of the operating buttons of the Wireless smart multi-control: A – OK Button B – Back Button C – + Button D –...
Page 6
MITSUBISHI ELECTRIC EUROPE / SVL series / SERVICE MANUAL LIST OF SET UP PARAMETERS...
Page 7
ERROR CODES IN WIRELESS SMART MULTI-CONTROL Error number indicator (see code number in the next list) Important! After solving the issue and removing the error from the screen, unit must be electrically disconnected for 30 secs. and plugged again it.
Page 8
MITSUBISHI ELECTRIC EUROPE - ESPAÑA Av. Castilla, n.º 2 Edificio Europa, primera planta Pq. Empresarial San Fernando 28830. San Fernando de Henares, Madrid, España MITSUBISHI ELECTRIC EUROPE - ITALIA Via Energy Park 14 20871 Vimercate (MB) Italia Mitsubishi Electric Europe B.V.
Need help?
Do you have a question about the SVL Series and is the answer not in the manual?
Questions and answers