American Auto-Matrix Matrix Hardware Installation Manual page 4

1.1.3 S D
TATIC ISCHARGE
Static discharge can produce voltages high enough to damage electronic circuits and components. The
microprocessor and associated circuitry are sensitive to static discharge. Follow these precautions while
working with the product during service and installation:
Work in a static free environments

Discharge any static electricity you may have accumulated by touching a known, securely grounded

object.
Do not handle the printed circuit board (PCB) without proper protection against static discharge. Users

should handle PCB components while wearing a ground bracelet or strap (connected to Earth
ground).
1.1.4 M
ISCELLANEOUS
1-2
P
RECAUTIONS
WARNING
Follow the precautions provided specific to
static discharge.
P
RECAUTIONS
NOTE
Do not apply this product to aerospace systems,
mailine communication systems, nuclear power
control systems or medical equipment involved in
life support that require high reliabilitiy and safety,
as it is not intended for such use or application.
NOTE
This device complies with Part 15 of the FCC rules.
Operation of this equipment is subject to the
following conditions:
1.This device may not cause harmful interference.
2.This device must accept any interference
received, including interference that may cause
undesired operation.
Matrix Area Controller Hardware Installation Guide (3/6/2009)