Advertisement
Quick Links
Advertisement
Related Manuals for MuxLab 500556-V2
Summary of Contents for MuxLab 500556-V2
- Page 1 Dante 4-Channel Audio DSP User Manual 500556-V2...
- Page 2 7.2 Connecting to the Unit...........................8 7.3 Settings.................................9 7.4 Scene..................................9 7.5 Pre-Pocessing..............................10 7.5.1 Input Settings............................10 7.5.2 Parametric Equalizer...........................11 7.5.3 Compressor............................12 7.5.4 Ducker..............................13 7.5.5 AFC/AEC/ANS............................14 7.6 Matrix Mixing..............................16 7.7 Post-Processing..............................16 7.7.1 Graphic Equalizer..........................16 7.7.2 Limiter...............................17 7.8 Output Settings..............................17 8. Application Diagram.............................19 © MuxLab Inc. 2024 94-001057-A/SE-001057-A...
- Page 3 All contents in this manual are copyrighted, and cannot be cloned, copied, or translated without the express permission of MuxLab Inc. Product specifications and information in this document are for reference only, and the content may be updated from time to time without prior notice.
- Page 4 Dante 4-Channel Audio DSP 2. Introduction The Dante 4-Channel Audio DSP (Model 500556-V2) is a product developed for the transmission, routing, and processing of audio signals in Dante networks. It can perform high- quality, low-delay audio transmission, supports 4-way input and output balanced analog channels, and can be powered via PoE from any PoE network switch or via a 12V DC power supply.
- Page 5 Number of RS232 Serial Ports Number of USB sound cards Working Temperature 0℃ - 40℃ Working Power Supply 2VDC/PoE power supply 2 years Warranty 500556-V2 Dante 4-Channel Audio DSP (UPC: 627699015568) Order Information 6. Hardware Interface 6.1 Front Panel © MuxLab Inc. 2024 94-001057-A/SE-001057-A...
- Page 6 4. OUTPUT signal output interface: can be connected to amplifiers, active speakers and other audio devices 5. RS485 interface: RS485 balanced interface. 6. RS232 interface: RS232 balanced interface. 7. USB interface: support USB sound card function. © MuxLab Inc. 2024 94-001057-A/SE-001057-A...
- Page 7 Note: Make sure the IP address of the client PC and the device are on the same network segment; otherwise it will not be accessible. Install the "Dante 4-Channel DSP" software you just downloaded so you can control all the DSP options. © MuxLab Inc. 2024 94-001057-A/SE-001057-A...
- Page 8 [OK] button to enter. 4. If you need to modify the device IP address information, right-click Device name, and the Setting window will pop up, and you can change it according to the requirements of the use environment. © MuxLab Inc. 2024 94-001057-A/SE-001057-A...
- Page 9 Load: loads the selected scene. Import: import the saved scene file. Export: export the scene locally. Modify: modify the scene name. Add: add new scene, maximum 8 scenes can be added. Delete: delete the scene. © MuxLab Inc. 2024 94-001057-A/SE-001057-A...
- Page 10 4. Indicator light: When there is no signal into the input channel, the indicator light is gray; when there is a small signal into the input channel, the indicator light is green; when there is a large signal into the input channel, the indicator light is red. © MuxLab Inc. 2024 94-001057-A/SE-001057-A...
- Page 11 Gain: the gain/attenuation value of the frequency center point Bandwidth: That is, the range of influence of the segment around the center frequency, the larger the value, the greater the bandwidth and the greater the range of influence. © MuxLab Inc. 2024 94-001057-A/SE-001057-A...
- Page 12 Ratio: The input and output compression ratio of the compressor. Attack Time: The start time of the compressor. Release: The recovery time of the compressor. Reset: reset to default parameters Bypass/Active: Compressor enable indicator or control © MuxLab Inc. 2024 94-001057-A/SE-001057-A...
- Page 13 Hold Time：when there is no signal input from the control signal input channel, the algorithm will hold time. Release Time：release time of dodger algorithm. Output Selection: output channel. Reset：reset as default parameter. Bypass/Active：enable/disable the compressor. © MuxLab Inc. 2024 94-001057-A/SE-001057-A...
- Page 14 Using sub-band algorithm, it has less MIPS consumption. The length of echo path can be set, the maximum echo off tail can be supported up to 512ms, suitable for all kinds of large, medium, and small meeting rooms. © MuxLab Inc. 2024 94-001057-A/SE-001057-A...
- Page 15 Because of the unique post-processing algorithm, the noise suppression algorithm can track the environmental noise changes quickly and accurately while maintaining good output sound quality. Noise suppression reaches -30db, speech is almost completely distortion free. © MuxLab Inc. 2024 94-001057-A/SE-001057-A...
- Page 16 Gain: Gain/attenuation at the frequency center point. Flatten: restore the gain of all frequency bands to 0dB. Narrow: A type of bandwidth that is lower than normal bandwidth. Normal: Commonly used ordinary bandwidth. Broadband: the widest © MuxLab Inc. 2024 94-001057-A/SE-001057-A...
- Page 17 G.R.: The difference between the signal processed by the limiter and the input signal. 7.8 Output Settings Muting and inverting the outputs as well as the output audio gain can be set. © MuxLab Inc. 2024 94-001057-A/SE-001057-A...
- Page 18 2. Invert: Invert button. 3. Mute: Mute button. 4. Channel fader: channel gain value range (0~-72dBFS), can be controlled by fader. © MuxLab Inc. 2024 94-001057-A/SE-001057-A...
- Page 19 Dante 4-Channel Audio DSP 8. Application Diagram 2321 Cohen | St-Laurent , H4R 2N7 | Québec, Canada Tel: 514-905-0588 | Fax: Dante 4-Channel Audio DSP 514-905-0589 | Toll free: 1-877-689-5228 info@muxlab.com | 500556-V2 salesteam@muxlab.com | www.muxlab.com Follow us:...
Need help?
Do you have a question about the 500556-V2 and is the answer not in the manual?
Questions and answers