Related Manuals for Bosche zippcube
Summary of Contents for Bosche zippcube
- Page 1 BOSCHE Volume and Weight Measurement System zipp cube ® Operating Instructions Original operating instructions (keep in a safe place for future use) Version A.02 EN Last revised: 12/5/2021...
- Page 2 These instructions were drawn up on: 12/5/2021 Copyright Bosche GmbH & Co. KG retains all rights to this document. You are not allowed to duplicate its contents, inform third parties of it or use its contents without our express approval.
- Page 3 8.1 Data of the volume and weight measurement system ........25 8.2 Data of the optional trolley ................25 8.3 Object dimensions ..................25 9 Spare Parts ......................26 9.1 Overview of spare parts ................. 26 10 Index ........................27 Edition A.02 BOSCHE Wägetechnik Page 3 112/05/2021...
- Page 4 Note Errors and omissions in the documentation reserved. If necessary, please inform Bosche GmbH & Co. KG of any errors in the documentation. We would also be grateful for any suggestions for improvements that you may have.
- Page 5 • to the life and limb of operators, third-parties and animals who are in the vicinity of the device, • to the device itself and to other material assets of the operating company, • to efficient operation of the device. Edition A.02 BOSCHE Wägetechnik Page 5 12/5/2021...
- Page 6 1 | Safety measurement system 1.1.2 SAFETY SYMBOLS IN THESE INSTRUCTIONS You can find the symbols below at every important location in these instructions. Paying particular attention to this information and be particularly careful in these cases.
- Page 7 Operating personnel must devote all their attention to working with the volume and weight measurement system. Danger The safety of yourself, your colleagues and bystanders in the vicinity of the volume and weight measurement system is at stake. Edition A.02 BOSCHE Wägetechnik Page 7 12/5/2021...
- Page 8 BOSCHE offers a limited warranty for components that have become defective due to stress or material faults. The warranty period begins on the day of delivery. The BOSCHE company reserves the right to repair components or to replace them. Repairs that are carried out during the warranty period do not extend it.
- Page 9 Description | 2 Instructions DESCRIPTION GENERAL The Zippcube volume and weight measurement system is use: • to measure the length, width and height of an object • to calculate the volume of the bounding box (determining the smallest possible packaging) •...
- Page 10 • Nothing must interrupt the light beams except for the measurement object. Industrial PC The Bosche 15-inch industrial PC is used as the display unit. You operate the industrial PC using a touchscreen. The industrial PC has the following interfaces: •...
- Page 11 If you use different weighing software, output of measured values is described in its manual. OPTIONAL EQUIPMENT Note All the equipment and enhancements that are available as options are described in Chapter 5, “Optional Equipment”. Edition A.02 BOSCHE Wägetechnik Page 11 12/5/2021...
- Page 12 3 | Transporting, Setting Up, zippcube® volume and weight Connecting measurement system RANSPORTING, ETTING UP, ONNECTING INSPECTION PACKAGING On receiving the volume and weight measurement system, check the packaging of the system itself and of any accessories for visible damage.
- Page 13 Step 2 Plug in the volume and weight measurement system to the mains (if operating without a rechargeable battery = standalone use). Step 3 Insert the charged batteries (optional equipment for mobile use, for example). Edition A.02 BOSCHE Wägetechnik Page 13 12/5/2021...
- Page 14 3 | Transporting, Setting Up, zippcube® volume and weight Connecting measurement system TRANSPORTATION POSITIONS 3.5.1 DESPATCH If you need to despatch the volume and weight measurement system (e.g. to the manufacturer for repairs), proceed as follows: Step 1 Put the display into the transport position (parallel to the measurement port).
- Page 15 Step 2 Release the two brakes on the casters of the trolley. Step 3 Carefully push the trolley to the new measuring location. Step 4 There, secure the trolley by applying the two brakes again. Edition A.02 BOSCHE Wägetechnik Page 15 12/5/2021...
- Page 16 Operation measurement system 4 OPERATION This scale is used to determine the dimensions and the weight of an object as well as its volume weight. SWITCHING ON 0.00 kg 0.00 kg Zeroing the scale Step 1 Press the pushbutton on the back.
- Page 17 When measuring, the light grid strips must be free from foreign objects. You must not make any changes to the measuring frame (this could impair measuring precision and functioning). Note The weighing software is described in separate operating instructions. Edition A.02 BOSCHE Wägetechnik Page 17 12/5/2021...
- Page 18 Operation measurement system MONITORING OF INSPECTION, MEASURING AND TEST EQUIPMENT 2.5 kg 2.5 kg Within the scope of quality assurance, you must inspect the measuring technology properties of the scale in the volume and weight measurement system at regular intervals.
- Page 19 After this, place it on the precision scale for fine adjustment. ADDITIONAL USB PORTS As an option, three additional USB ports are available that are each protected by a screw-on cap. Edition A.02 BOSCHE Wägetechnik Page 19 12/5/2021...
- Page 20 Note The battery switch and its use are described in separate instructions. TROLLEY A trolley for the zippcube volume and weight measurement system is available as an option. The volume and weight measurement system is bolted on the trolley. The trolley has two fixed casters without brakes and two casters with parking brakes.
- Page 21 Step 2 Pull out the mains plug or remove the batteries. Step 3 Wait for a few minutes until the system is safely deenergised. Step 4 Restart the system (see also Section 4.1). Edition A.02 BOSCHE Wägetechnik Page 21 12/5/2021...
- Page 22 Troubleshootin measurement system CONTACTING CUSTOMER SERVICE Bosche GmbH & Co. KG Reselager Rieden 3 D-49401 Damme Phone +49 (0)5491 9996890 Fax +49 (0)5491 9996899 E-mail info@bosche.eu INFORMATION NEEDED WHEN CONTACTING CUSTOMER SERVICE Operating company Information Name of your company...
- Page 23 When cleaning the bottom of the glass plate: Due to the weight of the glass plate, two people must lift it. Risk of injury due to incorrect lifting technology or the glass breaking! Edition A.02 BOSCHE Wägetechnik Page 23 12/5/2021...
- Page 24 Disposal measurement system MAINTENANCE, SERVICING Only trained service engineers who have been authorised by Bosche are allowed to open the volume and weight measurement system. Danger Before opening the volume and weight measurement system, you must ensure that it has been safely deenergised and disconnected from the mains.
- Page 25 Operating Technical Data | 8 Instructions TECHNICAL DATA DATA OF THE VOLUME AND WEIGHT MEASUREMENT SYSTEM Feature Value/Unit Zippcube S Zippcube M Zippcube L Length 745 mm 1200 mm 1565 mm Width 655 mm 895 mm 1105 mm Height 580 mm...
- Page 26 Bosche’s Customer Service Department. The address of Bosche’s Customer Service Department is on the reverse of the title page. OVERVIEW OF SPARE PARTS You can purchase the components below as spare parts from Bosche’s Customer Service Department: 1. Perspex screen (2 mm) 2. Industrial PC 3.
- Page 27 Labelling of safety information ......6 Components ............ 9 Inspection ............12 Customer service ........... 26 Light grid system ..........9 Measurement plate .......... 9 Measurement port ..........9 Measured values ..........11 Edition A.02 BOSCHE Wägetechnik Page 27 12/5/2021...
- Page 28 Signed for and on behalf of: - Signé pour et au nom de: - Ondertekend voor en namens: - Firmado por y en nombre de: Bosche GmbH & Co.KG Damme, 27/6/2017 Bosche, Dr. Jarmila, Geschäftsführer - managing director – manager – gerente...
Need help?
Do you have a question about the zippcube and is the answer not in the manual?
Questions and answers